Makita Subcompact 3‑Pc. Combo Kit, 18V LXT

Makita Hammer Drill/ Impact Kit, 18V LXT
Makita Subcompact Drill /Impact /Radio Combo Kit, 18V LXT

Makita Subcompact 3‑Pc. Combo Kit, 18V LXT

Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX300RB is a combo kit with three 18V sub-compact solutions for drilling, driving, fastening and cutting.

The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes brushless recipro saw with 0-3,000 strokes per minute, yet weighs only 6.2 lbs. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.

It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

Add to Project List
Add to quote
SKU: CX300RB Category: Tags: , , , , ,
  • Description
  • Features
  • Download
  • Video
  • Specifications

Description

  • DRIVER-DRILL : Compact and ergonomic design at 6-3/8″ long weighs only 2.8 lbs.
  • IMPACT DRIVER : Compact and ergonomic design at 5-5/16″ long weighs only 2.6 lbs.
  • RECIPRO SAW : Compact and ergonomic design at 12-1/2” long and weighs only 5.7 lbs.
  • TECHNOLOGY : BL™ Brushless motor is controlled to optimize battery energy use for up to 50% longer run time

INCLUDES : XFD11ZB, XDT15ZB, XRJ07ZB, (2) 18V Compact LXT® Lithium-Ion battery, Rapid Optimum Charger, tool bag

  • Driver-Drill weighs only 2.8 lbs. with battery for reduced operator fatigue
  • Compact and ergonomic design at only 6-3/8" long
  • Mechanical variable 2-speed transmission (0-500 & 0-1,700 RPM) for a wide range of drilling and driving applications; delivers 350 in.lbs. of Max Torque
  • Impact Driver weighs only 2.6 lbs. with battery for reduced operator fatigue
  • Compact and ergonomic design at only 5-5/16" long
  • Assist Mode (A-mode) feature helps eliminate "screw cam-out" and "cross threading" by driving at low speed until impact begins
  • Variable speed (0-1,300/0-3,000 RPM & 0-1,600/0-3,900 IPM) for a wide range of fastening applications; delivers 1,240 in.lbs. of Max Torque in an ultra compact design
  • Recipro Saw delivers 0-3,000 strokes per minute and a 13/16" stroke length for faster cutting
  • Compact and ergonomic design at 12-1/2” long and weighs only 5.7 lbs.
  • Ideal for work in tight spaces
  • Efficient BL™ Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
  • The BL™ Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
  • The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
  • Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance for operation in harsh conditions
  • 18V Compact LXT® Lithium-Ion 2.0Ah battery BL1820B features an integrated L.E.D. battery charge level indicator
  • 18V Compact Lithium-Ion 2.0Ah battery BL1820B provides up to 50% more run time per charge*
  • 18V Compact Lithium-Ion 2.0Ah battery BL1820B reaches full charge in 25 minutes or less
  • Rapid Optimum Charger communicates with the battery's built-in chip throughout the charging process to optimize battery life by actively controlling current, voltage and temperature
  • Rapid Optimum Charger has a built-in fan to cool the battery for faster, more efficient charging
  • Equipped with Star Protection Computer Controls(TM) to protect against overloading, over-discharging and over-heating
  • 3-year limited warranty on tool, battery and charger
  • Only use genuine Makita batteries and chargers
  • *compared to BL1815

Download product information: PDF Flyer

  • Tool Count :3
  • Voltage :18V
  • Battery :18V LXT® Compact Lithium-Ion
  • Battery Charge Time (minutes) :25
  • Shipping Weight :15.435 lbs.
  • UPC Code :088381-850513

Related Products

  •
    Quick View

    Makita 1-3/4″ Coil Roofing Nailer

    The Makita 1-3/4″ Roofing Coil Nailer combines rugged construction and robust performance with less weight (only 5.2 lbs.). The AN454 accepts standard .120 shank diameter coil roofing nails, from 3/4” to 1-3/4” in length. The AN454 is engineered for longer tool life with durable and lightweight aluminum housing and an easy-loading adjustable canister. 
    Ease-of-use features include a “tool-less” depth adjustment, engineered for more precise control and flush nailing. Additional features include large carbide inserts on the nosepiece for long lasting performance. Oversized steel wear plates are engineered to reduce abrasion on the tool.

  •
    Quick View

    Makita Subcompact 11/16″ SDS‑PLUS Rotary Hammer Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT® Sub-Compact Brushless 11/16” Rotary Hammer (accepts SDS-PLUS bits) is ideal for working in tight spaces and for overhead conditions.

    The XRH06RB has an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4,800 BPM and .88 ft.lbs./1.2 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. lights, and one-touch sliding chuck for easy bit changes.

    It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)

    Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.

    The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.

    It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita 1/2″ Angle Drill w/Cord

    Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.

  •
    Quick View

    Makita Subcompact Drill /Impact /Radio Combo Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.

    It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.

    For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.

  •
    Quick View

    Makita Subcompact Impact /Drill Driver Kit, 18V LXT

    Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.

    The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. There are also two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.

  •
    Quick View

    Makita Multi‑Tool Kit

    Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.

    Power and Performance

    The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.

    The TM3010CX1 also features a range of comfort and convenience features including reduced vibration (6 m/s²) and lower noise (74dB), a small diameter barrel grip, and a large on/off slide switch with lock-on button. The “tool-less” clamp system provides easier removal and installation of accessories.

    The TM3010CX1 is engineered for a full range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class multi-tool.

  •
    Quick View

    Makita 3/8″ Angle Drill w/Cord Paddle Switch

    With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.

  •
    Quick View

    Makita 7″ Compact Jobsite Fan, 18V LXT

    The Makita 18V max LXT® Lithium-Ion Cordless 7-1/8” Fan is a portable and convenient air-moving solution for painters, contractors, and more.

    The fan has three speed settings and an oscillation selector for optimal air velocity and control. Added features include tilt-settings for better direction of air flow, and an adjustable hook for easy handling and hanging. The 3-stage automatic timer has 1-hour, 2-hour and 4-hour power-off selection.

  •
    Quick View

    Makita 5″ Angle Grinder with SJS Tech

    Makita’s 5” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9565CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.

    The 9565CV is a versatile and powerful grinder with variable speed, allowing the user to set the RPM to the material. The variable speed control feature makes the 9565CV ideal for stone work, including polishing and grinding.