Sanding Belts
Sanding belts are used in several styles of mechanical sanders, including portable belt sanders, benchstand sanders, and backstand sanders. These sanding belts are good quality, useful for a variety of sanding tasks from rough work and surface prep, to finishing.
- Additional information
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
Additional information
| Size & Grit | 3″ x 21″ – 60, 3″ x 21″ – 80, 3″ x 21″ – 120, 3″ x 24″ – 40, 3″ x 24″ – 60, 3″ x 24″ – 80, 3″ x 24″ – 120, 4″ x 24″ – 36, 4″ x 24″ – 60, 4″ x 24″ – 80, 4″ x 24″ – 120, 6″ x 48″ – 120 |
|---|
Sanding belts are used in several styles of mechanical sanders, including portable belt sanders, benchstand sanders, and backstand sanders. These sanding belts are good quality, useful for a variety of sanding tasks from rough work and surface prep, to finishing.
Aluminum Oxide:
General purpose grain on X-weight backing for rapid stock removal and long life.
For ferrous metals, stainless steel, non-ferrous metals, composites, plastics and wood.
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Quick ViewMakita Plate Joiner, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless Plate Joiner (model XJP03Z) provides portability and performance in the field or in the shop — without the cord. The XJP03Z combines power and precision with ease-of-use features for strong and accurate biscuit joints for furniture making, cabinet construction and fine woodworking applications.
The XJP03Z provides up to 320 cuts or 160 joints on a single charge. The rack-and-pinion vertical fence system is engineered for accurate fence adjustments, and the cast aluminum pivot fence has three positive stops at 0 degrees, 45 degrees, and 90 degrees. The blade diameter is 4 inches, and there are six depth settings with one-touch stops for the most common biscuit sizes including #0, #10 and #20.
-
Read MoreQuick View
Dekfast Roof Screws, 10″ to 18″
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
FM and Dade County Approved. -
Quick View
Makita 5″ Random Orbit Sander, Variable Speed
Makita’s 5-Inch Random Orbit Sander with variable speed combines power, speed and performance with improved grip and control, including an innovative adjustable front handle. The large 1/8-inch random orbit action delivers fast and smooth sanding and a swirl-free finish, with a pad control system for controlled pad speed upon start-up. The rubberized palm grip and top handle fit like a glove with even pressure and easy control. It is ideal for woodworkers, finish carpenters and general contractors.
-
Read MoreQuick View
DeWalt Wood Knockers II
DeWalt Wood-Knocker concrete inserts are installed onto wooden forms used to support newly poured concrete floor slabs, roof slabs or walls. When the forms are stripped, the color-coded flange is visibly embedded in the concrete surface. The inserts allow the attachment of steel threaded rod or threaded bolts in sizes ranging from 1/4″ to 3/4″ in diameter. The hex impact plate offers resistance to rotation within the concrete as a steel threaded rod or threaded bolt is being installed.
-
Read MoreQuick View
Sand Paper Sheets
Basic sand paper sheets, for your basic manual sanding needs.
Convenient 9 ” x 11 ” sheets can be cut down to fit a sanding block. -
Quick View
Makita 5″ Random Orbit Sander, 18V LXT
The 18V LXT® Lithium-Ion Cordless 5″ Random Orbit Sander (model XOB01Z) delivers increased efficiency and mobility to woodworkers. The XOB01Z features three speed settings, superior ergonomics and up to 40 minutes of run time on a single charge. Match the speed to the application with three speed settings (7,000/9,500/11,000 OPM), which are easily changed with a one-touch electronic control switch. The large 1/8” random orbit action is engineered for efficient sanding, fast material removal, and a swirl-free finish. The pad brake reduces free-spin for improved overall finish, and a control system regulates pad speed at start-up. The XOB01Z uses quick-change 5” (8-hole) hook-and-loop abrasive paper for increased versatility.
-
Quick View
Makita Multi Tool Kit w/ Cord
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding. -
Quick View
3M 8210V Particle Dust Mask
The lightweight, disposable N95 particulate dust respirator is designed to help provide quality, reliable worker respiratory protection. 3M uses a variety of innovative features to help you meet your respiratory protection and comfort needs. The respirator incorporates 3M’s proprietary technology with advanced electrostatically charged microfiber filter media. The proprietary 3M™ Cool Flow™ Exhalation Valve reduces heat build up inside the respirator to help keep the wearer more comfortable. Its adjustable noseclip and cushioning nose foam help provide a custom and secure seal.
-
Quick View
Makita 5″ 8 Hole H&L Backing Pad
Makita Sanding Pad for sanding flat surfaces. Made of high quality, durable rubber for long life. Eight holes for efficient for dust extraction. Hook & loop design for quick and easy abrasive paper changes.
-
Read MoreQuick View
Paddle Bits, Individual
Paddle bits, also called spade bits, have a wide, flat blade. They are commonly used by tradesmen such as electricians and plumbers for drilling holes through studs in walls for running wiring or pipes (auger bits and hole saws are also used for this), but they also have a place in the woodshop for drilling on fine woodworking projects.
An extension kit is available for the extreme jobs. It includes a 12″ extension shaft, and a bent-hex tool to securely tighten the retaining screws when the paddle bit is installed. (See image.)
