Cut Off Wheels, Type 27
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
These cut-off discs are Type 27, Depressed Center style.
- Additional information
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
Additional information
| Size, Arbor, & Abrasive | 4-1/2″ X .045″ X 5/8-11 – ZA60S, 4-1/2″ X .045″ X 7/8 – ZA60T, 5″ X .045″ X 5/8-11 – ZA60S, 5″ X .045″ X 7/8 – ZA60S, 6″ X .045″ X 7/8 – ZA60S, 7″ X 1/16″ X 7/8 – ZA60S |
|---|
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
A24R: Aluminum Oxide – Metal & Steel, Stainless.
General purpose. 14" are available in both double and triple reinforced.
A24T: Aluminum Oxide – Metal Decking & Cable.
Harder bond for more cuts on thinner metals. 14" are triple reinforced.
A36P: Aluminum Oxide – Metal & Steel
A36S: Aluminum Oxide – For stainless steel and steel.
A46N-ALU: Aluminum Oxide mixture.
Contains a non-loading bond. Good on Aluminum.
A60S: Aluminum Oxide – Metal Decking & Cable.
Extra-thin wheels for faster cutting with less resistance.
C24: Silicon Carbide – Stone/Concrete
ZA24S: Zirconia Aluminum Oxide – Metal & Stainless;
High performance cutting, recommended on thicker stock applications such as angle iron, angle bars.
ZA60R: Zirconia Aluminum Oxide – Metal, steel and stainless.
Longer lasting life and easy cutting action.
ZA60S: Higher percentage of special Premium treated Alox grain and premium fiberglass net for Maximum safety.
ZA60T: Higher percentage of special Premium treated Alox grain and premium fiberglass net for Maximum safety.
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Quick ViewFGF Wheel, Type 29
A raised knob pattern on the wheel face allows for exceptionally cool grinding and no material load up. Engineered as Type 29 for easy grinding and blending on curve and straight work pieces without gouging. These wheels are recommended for metal, steel, aluminum, stainless steel, cast iron and non-ferrous metals.
-
Quick ViewMakita Dust Extraction Shroud, 5″
The Makita Dust Extracting Surface Grinding Shroud (195236-5) is designed to fit Makita 4-1/2 in. – 5 in. grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface.
The outside diameter of the extraction port will work with most standard vacuum hose systems. The dust shroud is ideal for concrete finishing, concrete material removal and paint or surface coating removal. -
Quick View
Mandrel Adapter, 1/4″ X 1/4″
The CGW 1/4″ x 1/4″ mandrel adapter is made for small diameter cut-off wheels with 1/4″ arbors. These mandrels can be used on electric or battery operated drills or on high speed air tools such as a die grinder.
-
Quick View
Makita 5″ Trigger Switch Grinder
The Makita 5 in. angle grinder (GA5010Z) has a refined design at only 5.8 lbs. for reduced operator fatigue. An ergonomic soft grip provides increased comfort on the job. It includes a rotatable gear housing that can be positioned every 90°.
The GA5010Z is powered by a 10.5 AMP motor that delivers 11,000 RPM, with electric brake for maximum productivity. It is engineered for a full range of metalworking tasks and is ideal for welders, fabricators, masons, maintenance/repair, and more. -
Quick View
Makita 7″ Trigger Handle Grinder
The Makita 7 in. Angle Grinder is built around a powerful 15 Amp motor that delivers up to 6,600 RPM for fast stock removal. It features labyrinthine construction that helps seal internal components from outside contaminants to help increase tool life.
The easy-to-use large trigger switch locks on for extended operation, and a large shaft lock permits easy wheel changes. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control. A 7 in. grinding wheel is included. -
Quick View
Mandrel, 1/4″ to 3/8″
This mandrel adapter allows the user to use cutting or grinding discs with different arbor styles on various tools.
-
Quick View
Makita Dust Extraction Cutting Guard for Grinder
The Makita Dust Extraction Cutting Guard is designed to work with the Makita 4-1/2″ and 5″ grinders, both corded and cordless. It forms a perfect barrier around the tool to capture as must residue as possible when in use.
-
Quick View
Makita 4-1/2″ Slide Switch Grinder w/Cord, 2 Pack
The Makita 4-1/2″ Angle Grinder has a labyrinth construction that seals and protects the motor and bearings from dust and debris for a long life, with an additional, protective zigzag varnish that seals the motor from contaminants by forming a barrier under rotation. This UL-listed grinder provides high-output power with its 7.5 AMP motor that maintains a 11,000 RPM speed to produce excellent grinding with a 2-1/2 in. small-circumference, barrel-grip handle for added comfort. All ball-bearing design and metal gear housing provide durability.
This is a special 2-Pack of this corded tool. -
Read MoreQuick View
Grinding Wheels, Type 27
Grinding wheels are used for dressing the surface of material, from hard and soft metals, to stone and concrete, to plastics. The various product designs and abrasive types allow a great range of uses.
-
Quick View
Makita 4-1/2 – 5″ Angle Grinder w/ Variable Speed, 18V LXT
Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder with Electric Brake (XAG16Z). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG16Z is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
Additional features include an electric brake that stops the grinding or cut-off wheel in 2 seconds or less, and Electronic Torque Control that turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop. The variable speed control dial allows manual RPM adjustment (3,000 – 8,500), allowing the user to match the speed to the application.
