Cut Off Wheels, Large Diameter
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
- Additional information
- Description
- Abrasive Materials and Applications
- Data Sheets & Downloads
Additional information
| Size, Arbor, & Abrasive | 12″ X 1/8″ – 7/8″ – A24R, 12″ X 5/32″ – 1″ – A24R, 12″ X 5/32″ – 20mm – A24R, 14″ X 5/32″ – 1″ – A24R, 14″ X 5/32″ – 20mm – A24T, 14″ X 3/32″ – 1″ – A36P, 14″ X 3/32″ – 1″ – ZA24S, 16″ X 5/32″ – 1″ – A36P |
|---|
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
A24R: Aluminum Oxide – Metal & Steel, Stainless.
General purpose. 14" are available in both double and triple reinforced.
A24T: Aluminum Oxide – Metal Decking & Cable.
Harder bond for more cuts on thinner metals. 14" are triple reinforced.
A36P: Aluminum Oxide – Metal & Steel
A36S: Aluminum Oxide – For stainless steel and steel.
A46N-ALU: Aluminum Oxide mixture.
Contains a non-loading bond. Good on Aluminum.
A60S: Aluminum Oxide – Metal Decking & Cable.
Extra-thin wheels for faster cutting with less resistance.
C24: Silicon Carbide – Stone/Concrete
ZA24S: Zirconia Aluminum Oxide – Metal & Stainless;
High performance cutting, recommended on thicker
stock applications such as angle iron, angle bars.
ZA60R: Zirconia Aluminum Oxide – Metal, steel and stainless.
Longer lasting life and easy cutting action.
ZA60S: Higher percentage of special Premium treated Alox
grain and premium fiberglass net for Maximum safety.
ZA60T: Higher percentage of special Premium treated Alox
grain and premium fiberglass net for Maximum safety.
Safety Data Sheet (SDS), Vitrified Bond Abrasives
Safety Data Sheet (SDS), Resin Bonded Abrasives
Safety Data Sheet (SDS), Flap Disc Abrasives
Related Products
-
Read MoreQuick ViewMakita Bandsaw Blades, 44-7/8″
Makita’s Portable Band Saw Blade features bi-metal construction that lasts longer than carbon blades for added user convenience and value. They make clean, quick cuts in a wide variety of applications including cutting all thread, rebar, pipe and channel. For use cutting a wide variety of materials including mild steel, aluminum and stainless steel.
-
Quick View
Diamond Vantage VHS 65 Gas Cut Off Saw
The VHS-65 is our featured high-speed gas saw by DIDA. It has a 14″ blade capacity that has up to a 5″ cutting depth, and that can be used wet or dry. It is built with an anti-vibration system to reduce operator fatigue. Engine starts are easy with the compression release valve, and a catalytic converter ensures low emission levels during use.
-
Read MoreQuick View
Cut Off Wheels, Concrete
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
These cut-off wheels are specifically designed to cut concrete, masonry, and stone. -
Quick View
Makita 12″ Dual Bevel Sliding Compound Miter Saw
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).
-
Quick View
Cut Off Wheel, Stationary, Double Reinforced
This cut off wheel is made with heavy duty fiberglass reinforcement, for high-speed machines, and demanding cutting tasks. It meets or exceeds all safety standards for all machines on the market.
-
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Quick View
Makita Recipro Sawzall w/Cord – 11 AMP
The Makita 11-Amp Reciprocating Saw (model JR3050T) combines a powerful 11 AMP motor with less weight (7.3 lbs.) for all day use and improved performance. The 11 AMP motor with variable speed (0-2,800 SPM) has a 1-1/8 inch blade stroke for efficient cutting. It is ideal for metal cutting, wood cutting, drywall and plaster, plastics, remodeling, and demolition applications.
-
Read MoreQuick View
Tungsten Carbide Tipped Hole Cutters
If you need to cut through the toughest materials, these tungsten carbide tipped hole cutters are the perfect solution. Whether it is stainless steel, cast iron, high density resin, or metal plate and sheet metal, these cutters get the job done.
They cut up to 3/16″ deep (4″ bit cuts up to 1″ deep), and have a spring included around the pilot bit to eject the slug. Sizes from 11/16″ to 2″ have a 7/16″ shank, and above that have a 1/2″ shank.
Each hole cutter comes with a pilot bit, and replacement bits are available.
The 4-piece kit contains the 7/8″, 1-1/8″, and 1-3/8″ cutters, plus the pilot bit. -
Quick View
Makita 14″ Chop Saw 15 AMP
The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
-
Read MoreQuick View
Bi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal.
