O.D. Tube Clamp
Unistrut clamps are used to secure pipe and conduit to strut. This piece is sized to the Outside Diameter (O.D.) of pipe or tubing, instead of inner diameter or standard pipe size.
Available from 1/4″ to 8-5/8″, by the 1/8″.
- Additional information
- Description
Additional information
| Size | 1/4″, 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1-1/8″, 1-1/4″, 1-3/8″, 1-1/2″, 1-5/8″, 1-3/4″, 1-7/8″, 2″, 2-1/8″, 2-1/4″, 2-3/8″, 2-1/2″, 2-5/8″, 2-3/4″, 2-7/8″, 3″, 3-1/8″, 3-1/4″, 3-3/8″, 3-1/2″, 3-5/8″, 3-3/4″, 3-7/8″, 4″, 4-1/8″, 4-1/4″, 4-3/8″, 4-1/2″, 4-5/8″, 4-3/4″, 4-7/8″, 5″, 5-1/8″, 5-1/4″, 5-3/8″, 5-1/2″, 5-5/8″, 5-3/4″, 5-7/8″, 6″, 6-1/8″, 6-1/4″, 6-3/8″, 6-1/2″, 6-5/8″, 6-3/4″, 6-7/8″, 7″, 7-1/8″, 7-1/4″, 7-3/8″, 7-1/2″, 7-5/8″, 7-3/4″, 7-7/8″, 8″, 8-1/8″, 8-1/4″, 8-3/8″, 8-1/2″, 8-5/8″ |
|---|
Unistrut clamps are used to secure pipe and conduit to strut. This piece is sized to the Outside Diameter (O.D.) of pipe or tubing, instead of inner diameter or standard pipe size.
Related Products
-
Read MoreQuick View3/8″ Wide Beam Clamp, Plain
Beam clamps provide structural attachment to the flange of metal beams, purlins, channel strut, or angle iron. Most commonly used to attach threaded rod used to support HVAC duct-work, lights, and other hardware in the open or closed ceiling space of a room.
-
Quick ViewElite Clevis Hanger
A clevis hanger consists of one U-shaped clevis and a second V-shaped clevis with a hole in a flattened section at the base of the V, joined together with a bolt. Clevis hangers are used as a pipe attachment providing vertical adjustment for pipes
-
Quick View
3-Hole Corner Angle L Bracket, Stainless
This connector is used for connecting metal struts together, at a 90° angle. The two sides are 3-1/2″ and 2-1/2″ long, with three 9/16″ holes to secure to struts or other surfaces. Stainless steel material makes this product more rust resistant, and it is suitable for exterior uses where rain or salt water are expected.
-
Quick View
U-Bolt Style Beam to Channel Clamp
The U-Bolt style beam-to-channel clamp features a piece of bent plate and a u-bolt that is threaded on both sides to secure a strut in place against a beam. The strut is fed through the u-bolt, which is then tightened to secure both the plate to the beam and the strut to the plate. U-style beam clamps can be used to secure strut to either the underside of the beam or the inside of the beam, depending on the configuration of the clamp.
-
Quick View
8-Hole Strut Wing Corner Connector
This connector is used for connecting metal struts together, with the ends of two against a third strut between them. An electro-galvanized coating provides rust resistance.
-
Read MoreQuick View
Caddy Stand-Off Strap, 2-Hole for Conduit
Two-hole stand-off straps are used for mounting CPVC pipe to a wall, ceiling, or other surface. They eliminate the need for wood blocks under the pipe. They position the pipe 1-1/2″ off the surface.
-
Quick View
Elite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
Quick View
Elite Loop Hanger
Elite Loop Hangers are the recommended pipe support solution for the suspension of stationary non-insulated pipe lines.
-
Quick View
4-Hole Closed 45 Degree Angle Connector
This connector is used for connecting metal struts together, at a 45° angle. The two sides are 3-1/2″ and 4-1/8″ long, with four 9/16″ holes to secure it to struts, or other surfaces. An electro-galvanized coating provides rust resistance.
-
Read MoreQuick View
Junior Beam Clamp, Plain
Beam clamps provide structural attachment to the flange of metal beams, purlins, channel strut, or angle iron. Most commonly used to attach threaded rod used to support HVAC duct-work, lights, and other hardware in the open or closed ceiling space of a room.
