Rize KL100 KWIK-LOC Cable Connectors
The Rize Kwik-Loc connector is designed to work with Rize RWC cables of the appropriate size. The Kwik-Loc KL100 has a rated maximum work load of 150lbs, with a 5:1 safety factor.
- Description
The Rize Kwik-Loc connector is designed to work with Rize RWC cables of the appropriate size. The Kwik-Loc KL100 has a rated maximum work load of 150lbs, with a 5:1 safety factor.
Related Products
-
Quick ViewRize RWC4 X 15 Ft Looped Cable
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site.
-
Read MoreQuick ViewMalleable Wire Rope Clip, Galvanized
Wire rope clips are fittings used to make an eye or join two cable or wire rope ends together. This design of wire rope clip is available to handle wire rope or strand sizes ranging from 1/16″ – 1-1/8″. Malleable wire rope clips are used in light duty & general purpose applications. Each malleable wire rope clip is zinc plated.
-
Read MoreQuick View
Eye Bolt, Drop Forged, Stainless Steel
Drop forged eye bolts are high strength bolts for heavy duty applications. Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged Stainless steel material is extra strong and recommended for exterior applications.
-
Read MoreQuick View
Wire Rope Clip, Drop Forged, Heavy Duty, HDG
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Quick View
Eye Bolt, Turned w/Open Eye, Zinc
Wire open-eye or hook bolts are intended for light duty applications such as hanging small plants or other objects, and wire guiding. These eye bolts are also referred to a bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut unassembled. Open eye bolts feature an open hook design that allows the user to easily hang and remove loads as needed.
-
Quick View
Rize RWC2 X 15 Ft Single Loop Cable Kit, w/ KL75 KWIK-LOC
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.
-
Read MoreQuick View
Wire Rope Thimble, HDG
Wire rope thimbles are used in wire rope assemblies to keep an eye from being crushed. When a wire rope assembly is terminated with an eye or loop at the end, a cable thimble is inserted to form the eye of the loop before the rope is secured. Steel thimbles (or stainless steel thimbles in high corrosive environments), offer added protection from wear and tear of direct contact and deformation of the eye, extending the service life of the Wire Rope or Wire Rope Sling.
-
Read MoreQuick View
Eye Bolt, Machine Forged, Heat Treated
Machinery eye bolts are high strength bolts for heavy duty applications. Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged galvanized steel material is extra strong and recommended for exterior applications.
-
Read MoreQuick View
Eye Lag Screw, Turned
Zinc-Plated Lag Thread Screw Eyes are made with steel strength and are designed to attach cables or rope to surfaces. For use with ropes or cables with the same load rating. Perfect for light duty applications.
-
Quick View
Rize 0690TN Wire/Cable Hand Cutter
When cutting cable it is important to use a recognized cable cutter such as the Rize cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Kwik-Loc.
