Eye Bolt, Drop Forged, HDG
Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged galvanized steel material is extra strong and recommended for exterior applications.
- Additional information
- Description
Additional information
| Size | 1/4″ x 2″, 1/4″ x 3″, 1/4″ x 4″, 5/16″ x 2-1/4″, 5/16″ x 4-14″, 3/8″ x 1-1/4″, 3/8″ x 2-1/2″, 3/8″ x 3″, 3/8″ x 4-1/2″, 3/8″ x 6″, 1/2″ x 3-1/4″, 1/2″ x 4-1/2″, 1/2″ x 6″, 1/2″ x 8″, 1/2″ x 10″, 3/4″ x 6″ |
|---|
Eye bolts provide a method for anchoring chain and wire rope to a fixed surface such as wood, metal, concrete, etc. Forged galvanized steel material is extra strong and recommended for exterior applications.
Related Products
-
Read MoreQuick ViewClevis Grab Hook, Drop Forged
This high-quality clevis grab hook is made of forged steel, is heat-treated, and coated with a yellow zinc chromate finish so it can survive even the toughest conditions.
-
Quick ViewRize KL150 KWIK-LOC Cable Connector
The Rize Kwik-Loc connector is designed to work with Rize RWC cables of the appropriate size. The Kwik-Loc KL150 has a rated maximum work load of 250lbs, with a 5:1 safety factor.
-
Read MoreQuick View
Eye Bolt, Turned, 304 Stainless Steel
Wire eye bolts are intended for light duty applications such as, tie-downs and wire guiding. These eye bolts are also referred to as bent or turned eye bolts. Do not use them for lifting.Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut unassembled.Eye bolts feature a closed loop design that secures cables and chains in order to support the weight of heavy hanging objects such as plumbing pipes and wires.
-
Quick View
Rize 0690TN Wire/Cable Hand Cutter
When cutting cable it is important to use a recognized cable cutter such as the Rize cutter detailed here. This will ensure that the form of the rope is maintained prior to insertion in the Kwik-Loc.
-
Quick View
Rize Double Loop Harness w/Stainless Locking Eyelet
Rize Double Loop Harness with Stainless Locking Eyelets A snap hook system is used for clipping onto lighting, cable basket and cable tray. It is available with either WC2 or WC3 cable. They are offered in three styles; Y shape, V shape and single strand.
-
Quick View
Rize KL100 KWIK-LOC Cable Connectors
The Rize Kwik-Loc connector is designed to work with Rize RWC cables of the appropriate size. The Kwik-Loc KL100 has a rated maximum work load of 150lbs, with a 5:1 safety factor.
-
Read MoreQuick View
Aircraft Cable, Galvanized
Galvanized cable has been an industry staple for decades, and for good reason. Through smart engineering, it’s one of the most versatile and reliable building materials.
Our galvanized cable is available as 7×7 strands for 1/16″ and 3/32″, and as 7×19 strands for larger sizes up to 3/8″.
-
Quick View
Eye Bolt, Turned w/Open Eye, Zinc
Wire open-eye or hook bolts are intended for light duty applications such as hanging small plants or other objects, and wire guiding. These eye bolts are also referred to a bent or turned eye bolts. Do not use them for lifting. Turned eye bolts are manufactured from low carbon cold drawn steel wire and are supplied with NC rolled machine threads with one hex nut unassembled. Open eye bolts feature an open hook design that allows the user to easily hang and remove loads as needed.
-
Read MoreQuick View
Wire Rope Clip 316 Stainless
A wire rope clip, sometimes called a clamp, is used to fix the loose end of the loop back to the wire rope. It consists of a U-shaped bolt, a forged saddle, and two nuts.
-
Quick View
Rize RWC2 X 15 Ft Single Loop Cable Kit, w/ KL75 KWIK-LOC
The Rize Looped Cable enhances the Kwik-Loc suspension system by the addition of a pre-looped cable end. Once the wire rope is pulled around the anchor point and through the looped end of the cable, it is already secured at one end, saving time at the job site. The remaining wire rope “drop” is passed through a channel in the Rize Kwik-Loc. Then, the wire rope is either wrapped around the equipment or inserted through a fastening point and back up into the second channel of the same cable lock. The locking teeth inside the cable lock engage the wire rope which secures the equipment in place.
