Ankr-TITE Wej-It Anchors

Original Wej-It® Wedge Anchors
Hot
Ankr-TITE Wej-It Anchors
Ankr-TITE Wej-It Anchors
Ankr-TITE Wej-It Anchors
Ankr-TITE Wej-It Anchors

Ankr-TITE Wej-It Anchors

This anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry.

Add to Project List
Add to quote
SKU: Ankr-TITE Category: Tags: , ,
  • Description
  • Installation
  • Tech Specs
  • Part Numbers
  • Downloads
  • Video

Description

This anchor is a high-strength, fully threaded, and torque-controlled expansion anchor designed for anchoring into normal-weight concrete, lightweight concrete, and grouted concrete masonry. The Ankr-TITE anchor has a unique machine lathed expansion cone that supports a thick three dimple clip engineered to provide high load carrying capability and reduce slip in a variety of installation conditions. Full product line available in all materials.

ankr_tite_wedge_linedrawing-04Key Features and Benefits

  • Bolt Size is Hole Size®
  • Available in four combinations:
    1. Zinc plated carbon steel with steel clip
    2. Hot-dip galvanized carbon steel with 304 stainless steel clip
    3. All 304 stainless steel
    4. All 316 stainless steel
  • Sets up fast
    – Needs less rotation to achieve required torque
  • Unique “safety shoulder”
    – Supports clip when anchor is under strain
    – Minimizes bolt-end collapse and/or clip slippage under ultimate loading conditions
  • Enlarged dimples on clip
    – Reduce slip
    – Increase response in lighter concrete
  • 360° segment contact on clip equalizes load distribution
    – Increases load-carrying capacity
    – More adaptable to/”forgiving” in different installation conditions

ankr_tite_ccat_installationInstallation Instructions

  1. Drill the hole, whose diameter equals the anchor diameter, perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble.
  2. Drill the hole deeper than the intended embedment, but not closer than two diameters to the opposite surface of the concrete.
  3. A clean hole is necessary for proper performance. Clean the hole using a nylon brush and compressed air.
  4. Assemble the nut and washer so that the top of the nut is flush with the top of the anchor. Drive the anchor through the material to be fastened so that the nut and washer are flush with the surface of the material.
  5. Tighten the nut, or head, 3 to 5 turns past the hand tight position. Installing the "Ankr-TITE® Series" of anchors with a torque wrench is recommended for optimum performance. Refer to adjacent chart.*

NOTE: Always wear safety glasses. Follow drill manufacturer's instructions. Use only solid carbide-tipped drill bits meeting ANSI B212.15 diameter standards.

Can be used with almost any material, including:

Normal Weight Concrete
Lightweight Concrete
Solid Masonry

*Check with the "Specific Catalog Info" for more information

ankrwedge_ts1

 

ankrwedge_ts2

Zinc
Plated Steel		 Hot Dip  Type 304  Type 316 Anchor Size
(in.)		 Min. Embed
(in.)		 Thread Length
(in.)		 Quantity
(Box/Carton)

AT1413

ATG1413

ATS1413

ATSS1413

1/4 x 1-3/4

1-1/4

3/4

100/800

AT1421

ATG1421

ATS1421

ATSS1421

1/4 x 2-1/4

1-1/4

1-1/4

100/800

AT1431

ATG1431

ATS1431

ATSS1431

1/4 x 3-1/4

1-1/4

2-1/4

100/800

AT3821

ATG3821

ATS3821

ATSS3821

3/8 x 2-1/4

1-3/4

1

50/400

AT3823

ATG3823

ATS3823

ATSS3823

3/8 x 2-3/4

1-3/4

1-1/2

50/400

AT3830

ATG3830

ATS3830

ATSS3830

3/8 x 3

1-3/4

1-3/4

50/400

AT3833

ATG3833

ATS3833

ATSS3833

3/8 x 3-3/4

1-3/4

2-1/2

50/400

AT3850

ATG3850

ATS3850

ATSS3850

3/8 x 5

1-3/4

3-1/4

50/400

AT3870

ATG3870

ATS3870

ATSS3870

3/8 x 7

1-3/4

4-1/2

50/300

AT1223

ATG1223

ATS1223

ATSS1223

1/2 x 2-3/4

2-1/8

1-1/8

25/200

AT1233

ATG1233

ATS1233

ATSS1233

1/2 x 3-3/4

2-1/8

2-1/8

25/200

AT1241

ATG1241

ATS1241

ATSS1241

1/2 x 4-1/4

2-1/8

2-5/8

25/200

AT1242

ATG1242*

ATS1242

ATSS1242*

1/2 x 4-1/2

2-1/8

2-5/8

25/200

AT1252

ATG1252

ATS1252

ATSS1252

1/2 x 5-1/2

2-1/8

3-3/4

25/150

AT1270

ATG1270

ATS1270

ATSS1270

1/2 x 7

2-1/8

4-1/2

25/150

AT1282

ATG1282

ATS1282

ATSS1282

1/2 x 8-1/2

2-1/8

5

10/40

AT1210

ATG1210

ATS1210

ATSS1210

1/2 x 10

2-1/8

5

10/40

AT5832

ATG5832

ATS5832

ATSS5832

5/8 x 3-1/2

2-5/8

1-1/2

10/80

AT5841

ATG5841

ATS5841

ATSS5841

5/8 x 4-1/4

2-5/8

2-3/8

10/80

AT5842*

ATG5842

ATS5842*

ATSS5842*

5/8 x 4-1/2

2-5/8

2-5/8

10/80

AT5850

ATG5850

ATS5850

ATSS5850

5/8 x 5

2-5/8

3-1/8

10/80

AT5860

ATG5860

ATS5860

ATSS5860

5/8 x 6

2-5/8

4

10/80

AT5870

ATG5870

ATS5870

ATSS5870

5/8 x 7

2-5/8

4-1/2

10/80

AT5882

ATG5882

ATS5882

ATSS5882

5/8 x 8-1/2

2-5/8

5

10/40

AT5810

ATG5810

ATS5810

ATSS5810

5/8 x 10

2-5/8

5

10/40

AT5812

ATG5812

ATS5812*

ATSS5812*

5/8 x 12

2-5/8

5

10/40

AT3441

ATG3441

ATS3441

ATSS3441

3/4 x 4-1/4

3-1/4

2

10/80

AT3443

ATG3443

ATS3443

ATSS3443

3/4 x 4-3/4

3-1/4

2-1/2

10/80

AT3452

ATG3452

ATS3452

ATSS3452

3/4 x 5-1/2

3-1/4

3-1/4

10/60

AT3461

ATG3461

ATS3461

ATSS3461

3/4 x 6-1/4

3-1/4

3-3/4

10/60

AT3470

ATG3470

ATS3470

ATSS3470

3/4 x 7

3-1/4

4-3/4

10/60

AT3482

ATG3482

ATS3482

ATSS3482

3/4 x 8-1/2

3-1/4

5

10/40

AT3410

ATG3410

ATS3410

ATSS3410

3/4 x 10

3-1/4

5

10/40

AT3412

ATS3412

ATSS3412*

3/4 x 12

3-1/4

5

5/20

ATG3412

4/16

AT7860

ATS7860

ATSS7860

7/8 x 6

3-7/8

3-1/2

5/30

ATG7860

4/24

AT7880

ATS7880

ATSS7880

7/8 x 8

3-7/8

5

5/20

ATG7880

4/16

AT7810

ATS7810

ATSS7810

7/8 x 10

3-7/8

5

5/20

ATG7810

4/16

AT1060

ATS1060

ATSS1060

1 x 6

4

3

5/30

ATG1060

4/24

AT1090

ATS1090

ATSS1090

1 x 9

4

5

5/20

ATG1090

4/16

AT1012

ATS1012

ATSS1012

1 x 12

4

5

5/20

ATG1012

4/16

AT11490

ATS11490*

ATSS11490*

1-1/4 x 9

5-5/8

5

4/16

ATG11490*

4/12

AT11412

ATS11412*

ATSS11412*

1-1/4 x 12

5-5/8

5

4/16

ATG11412*

4/12

View Technical Manual: Ankr-TITE Wej-It Manual

View Catalog Info: Ankr-TITE Wej-It Catalog

View Submittal Info: Ankr-TITE Wej-It Submittal

Related Products

  • POWER-DROP Drop-In AnchorsPOWER-DROP Drop-In Anchors
    Quick View

    POWER-DROP Drop-In Anchors

    usaPOWER-Drop anchors are internally threaded anchors that provide wedge anchor performance with the convenience of a drop-in anchor. The safety shoulder supports the clip when the anchor is under strain to eliminate bolt-end collapse and/or clip slippage under ultimate loading conditions. The POWER-Drop is seismic rated: allowable values may be increased 33.3% for short-term loading in resisting earthquake or wind loads. Numerous head style and size options are available: they may be used with machine screws, tamper-proof bolts, threaded rod and a variety of other male-threaded fasteners

    Can be used with almost any material, including:

    • Normal Weight Concrete
    • Lightweight Concrete
    • Solid Masonry
  • POWER-Skru Bolt AnchorsPOWER-Skru Bolt Anchors
    Read More
    Quick View

    POWER-Skru Bolt Anchors

    usa

    The POWER-Skru Bolt Anchor is a high-strength screw anchorwith self-taping threads that offer a unique undercutting design for anchoring into concrete and masonry. No secondary setting is needed. The POWER-Skru Bolt Anchor provides high-strength performance with low installation torque. A heavy-duty mechanically-galvanized finish is available to enhance corrosion resistance.

    Can be used with almost any material, including:

    • Racking
    • Railing Sill
    • Stadium Seating
    • Tilt up Braces
    • Formwork
    • Anchoring Equipment
  •
    Read More
    Quick View

    SDS Bits for Drop-In Anchor

    SDS Drill bits designed to produce the perfect depth of hole for mini drop-in anchors.
    These bits are made in the USA, and feature a solid hardened steel body design with premium carbide braised in the tip. They also have a wide shoulder to prevent drilling too deep and hitting rebar or high tension wires, and an innovative dust removal design for fast drilling.

  •
    Read More
    Quick View

    Makita 9/16″ Hollow Sockets

    The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.

  • Hot
    Placeholder
    Quick View

    Ankr-TITE® CCAT Cracked Concrete Wedge Anchors

    The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions.

  • Hot
    Quick View

    Hex Head Cap Screws – Grade 8
    Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 8 has a greater tensile strength than Grade 5. Designed for use in high-strength and high-stress applications.
  •
    Quick View

    Ramset T3 Fuel Cell, 2-Pack

    All fuel cells replace conventional powder loads and drive more than 1000 shots.

  • Hot
    Quick View

    Hex Head Cap Screws – Grade 5
    Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum.
     
  •
    Read More
    Quick View

    T-Nuts

    T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.

  •
    Quick View

    Elite Beam Clamp

    Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.