Euroboor ECO-50S Magnetic Drill Press w/Integrated Oil System
Euroboor ECO.50S
Magnetic drilling machine
Ø 12 – 50 mm / 11,2 kg
The Euroboor ECO.50S magnetic core drilling machine converts maximum power through its two speed oil lubricated gearbox. This improves motor efficiency and lifetime of key components. This portable industrial magnetic core drilling machine has an integrated slide which ensures stable support, faster drilling times and more accurate hole sizing.
- Description
- Technical Data
- Video
The Euroboor ECO.50S is intended for commerical use as a drilling machine for drilling materials with a magnetizable surface using annular cutters and twist drills, and for countersinking in a weather-protected environment using the application tools and accessories recommended by EUROBOOR.
The magnetic drilling machine can be used horizontally, vertically, or overhead.
Metric
Annular cutting Ø 12 - 50 mm
Twist drilling Ø 1 - 23 mm
Countersinking Ø 10 - 55 mm
Length 320 mm
Width 200 mm
Height 445 - 615 mm
Stroke 170 mm
Weight 11,2 kg
Magnet (l x w x h) 160 x 80 x 42 mm
Magnetic force 1700 kg
Motor power 1250 W
Total power 1300 W
Speed (no load) (I) 315 rpm
(II) 690 rpm
Speed (load 1250 W) (I) 235 rpm
(II) 415 rpm
Spindle (Weldon) MT3 19,05 mm
Voltage 110 - 120 V / 60 Hz
220 - 240 V / 50 - 60 Hz
Imperial
Annular cutting Ø 7/16" - 2"
Twist drilling Ø 1/16" - 15/16"
Countersinking Ø 3/8" - 2 3/16"
Length 12 5/8"
Width 7 7/8"
Height 17 1/2" - 24 3/16"
Stroke 6 11/16"
Weight 24.7 lbs
Magnet (l x w x h) 6 5/16" x 3 1/8" x 1 5/8"
Magnetic force 3305 lbs
Motor power 11.4 A
Total power 11.8 A
Speed (no load) (I) 315 rpm
(II) 690 rpm
Speed (load 11.4 A) (I) 235 rpm
(II) 415 rpm
Spindle (Weldon) MT3 3/4"
Voltage 110 - 120 V / 60 Hz
220 - 240 V / 50 - 60 Hz
Related Products
-
Quick ViewMakita 7″ Trigger Handle Grinder
The Makita 7 in. Angle Grinder is built around a powerful 15 Amp motor that delivers up to 6,600 RPM for fast stock removal. It features labyrinthine construction that helps seal internal components from outside contaminants to help increase tool life.
The easy-to-use large trigger switch locks on for extended operation, and a large shaft lock permits easy wheel changes. The switch handle rotates 90 degrees left and right, while the side handle may be configured in any of 3 positions to promote user comfort and control. A 7 in. grinding wheel is included. -
Quick ViewMakita 14″ Chop Saw Kit, 18V X2 LXT
The Makita 18V X2 LXT® (36V) Brushless 14″ Cut-Off Saw is a cordless metal-cutting solution ideal for light gauge metals including stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The BL™ Brushless Motor eliminates carbon brushes so it runs cooler and more efficiently for longer life. The Saw is powered by two 18V LXT batteries for maximum cordless performance, and delivers 3,800 RPM for the most demanding metal cutting applications. It will cut up to 5″ round and 4” x 7-5/8” rectangular tubing.
-
Read MoreQuick View
Euroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Quick View
Euroboor 8 Pc Annular Cutter Set
Our HCS.KIT/9 contains High Speed Steel Annular Cutters which feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. Euroboor HSS annular cutters are equipped with high precision Weldon shanks.
This is a 6 piece HSS cutter set with bits of 9/16″, 11/16″, & 13/16″, each in the 1″ and 2″ lengths. The set also includes two pilot pins. They are IBC.70 & IBC.90. -
Quick View
Makita 4-1/2 – 5″ Angle Grinder w/ Variable Speed, 18V LXT
Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder with Electric Brake (XAG16Z). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG16Z is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
Additional features include an electric brake that stops the grinding or cut-off wheel in 2 seconds or less, and Electronic Torque Control that turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop. The variable speed control dial allows manual RPM adjustment (3,000 – 8,500), allowing the user to match the speed to the application.
-
Quick View
Euroboor Cobalt 29 Pc Index Jobber Set
The Euroboor M35 Cobalt High Speed Steel Jobber drill set is ideal for drilling through cast iron and stainless steel. The 135° split point helps to eliminate tip walking, and increases hole accuracy. The unique flute design is superior for removing shavings and material from the hole. All bits above 3/16″ have a 3-flat shank for stability in any drill or chuck.
-
Quick View
Euroboor EBM.36/P-18V Mag Drill
Say goodbye to the limitations of cables and cords, and experience the freedom of mobility and versatility with the state-of-the-art Euroboor Battery Machines (EBM). Designed with portability in mind, our EBM series are compact, lightweight and easy to transport. Plus, with no cords to worry about, you can work more efficiently and safely even on hard-to-reach places.
Now meet the ultimate mobile magnetic drilling machine: EBM.36/P-18V . -
Read MoreQuick View
Euroboor HML 2″ Weldon TCT Carbide Tip Annular Cutter
Euroboor Tungsten Carbide Tipped (SANDVIK) Annular Cutters 2″ with a drill depth of 2″ are equipped with a spiral flute which creates optimum chip removal and makes seizure next to impossible. These carbide cutting tools are used to drill in hardened materials such as HARDOX steel, stainless steels and high tensile strength steel such as railway tracks. Because of their composition, and when used in a proper way, these TCT cutting tools – 2″ are less susceptible to breakage than High Speed Steel Cutters, especially in larger diameters and lengths.
-
Read MoreQuick View
Euroboor Cutting Oils
Our Euroboor IBO.10 is a general cutting oil with premium cooling and lubrication features, suitable for mild steel. This cutting oil contributes to a high cutting power and tool preservation, and improved processing times.
Euroboor MV.4 is a lubricating and cooling concentrate suitable for all metals. This water-soluble concentrate is particularly suitable for automatic dosing systems. -
Quick View
Makita 5-7/8″ Metal Cutting Saw, 18V LXT
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
