Plow Bolts
Plow bolts feature a countersunk, flat head, square neck, and unified thread pitch. They are commonly used in road graders, scoop shovels, and other heavy-duty industrial equipment where a flat, smooth surface is required. Grade-5 plow bolts are made from a medium-grade, heat-treated carbon steel, and have a plain finish.
- Additional information
Additional information
| Diameter | 3/8″, 7/16″, 1/2″, 5/8″, 3/4″ |
|---|---|
| Length | 1″, 1-1/4″, 1-1/2″, 1-3/4″, 2″, 2-1/4″, 2-1/2″, 2-3/4″, 3″, 3-1/2″, 4″ |
Related Products
-

Read MoreQuick ViewAnchor Bolts, L-Bolts
-

Read MoreQuick ViewPro-Tect System for Pool Enclosures
PRO-TECT Fastener Protection System consists of a nylon sleeve and a cap that, together, cover and protect the anchor screw. The PRO-TECT nylon sleeve gives protection from electrolysis, providing worry-free installation while extending the life of the product. This is very important for the harsh conditions of the coastal environments and extreme temperatures.
The PRO-TECT cap snaps onto the top of the nylon sleeve, covering the head of the Blue-Tap anchor screw. Due to its special design, the cap will not come off easily. Caps are available in White and Bronze.
By repelling water and preventing penetration, PRO-TECT reduces or eliminates the need for warranty work, increasing life expectancy of the structures. -

Read MoreQuick ViewMro Thread-Locker, 50ml Bottle
MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals. -
Aluminum Key Hole Washer
Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.
-
Hot

Quick ViewFinished Hex Nuts – Grade 8: Yellow Zinc
Grade 8 hex nuts have internal machine threads, for use with machine thread bolts and screws. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.
-

Read MoreQuick ViewButton Head Socket Cap Screw
The button head version of socket cap screws are commonly used for removable panels, machine parts, die fixturing, and clamping. The socket head enables driving where there is not sufficient space for wrenches or sockets. The button head offers a wider bearing surface and high tensile strength, but offers lower profile than standard socket cap screws.
Button Head socket cap screws are available as an alloy with black oxide finish, or as stainless steel. -

Read MoreQuick ViewWood Screws
Wood screws are made to join two pieces of wood together and securely hold them. There are many styles of wood screws available today, from various driver tools to what material the wood screw is made from.
-

Read MoreQuick ViewAll Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy. -
Hot

Quick ViewFinished Hex Nuts – Grade 2
Hex nuts have internal machine threads, for use with machine thread bolts and screws. Grade 2: made of low carbon steel, these fasteners are applicable for most low strength commercial and industrial uses.
-
Read MoreQuick ViewSquare Plate Washer
Square plate washers are made from low carbon steel and have a larger surface area than round washers. Since they develop more friction when tightened against wood, they are often found in timber construction.
Often, square plate washers are used to attach treated lumber sill plates to concrete foundations. Another common use is using square plate washers to attach wood beams to the walls of a garage, and them mount the garage door rails and equipment.


