Hex Nuts
Hex nuts in all their forms are widely used in construction and manufacturing. There are many different styles of hex nuts, including finished hex nuts, acorn nuts, lock nuts, and heavy hex nuts. They are available in many different grades of metal, with different finishes, and with coarse or fine threads. Choose from the options below to find the right hex nut for your project.
Note: The Coupling Nut – Reducing items use the Inch – Special option because they have two sizes of threads.
- Additional information
- Description
- Technical Specs
- Data Sheets & Downloads
Additional information
| Style | Acorn Cap Nut, Coupling Nut, Coupling Nut – Reducing, Coupling Nut – Long, ESNA Nylon Lock Nut, Finished Hex Nut, Flange Lock Nut, Heavy Nut (2H), Jam Lock Nut, Kep Lock Nut, Metric Nut, Stover Cone Lock Nut |
|---|---|
| Inch or Metric | Inch – Coarse, Inch – Fine, Inch – Special, Metric – Coarse, Metric – Fine |
| Size - TPI | #2-56, #4-40, #5-40, #6-32, #8-32, #10-24, #12-24, 1/4″-20, 5/16″-18, 3/8″-16, 7/16″-14, 1/2″-13, 9/16″-12, 5/8″-11, 3/4″-10, 7/8″-9, 1″-8, 1-1/8″-7, 1-1/4″-7, 1-3/8″-6, 1-3/8″-12, 1-1/2″-6, 1-5/8″-5-1/2, 1-3/4″-5, 1-7/8″-5, 2″-4-1/2, 2-1/4″-4-1/2, 2-1/2″-4, 2-3/4″-4, 3″-4, 3-1/4″-4, 3-1/2″-4, 3-3/4″-4, 4″-4, #2-64, #4-48, #6-40, #8-36, #10-32, #12-28, 1/4″-28, 5/16″-24, 3/8″-24, 7/16″-20, 1/2″-20, 9/16″-18, 5/8″-18, 3/4″-16, 7/8″-14, 1″-14, 1-1/8″-12, 1-1/4″-12, 1-1/2″-12, 1-3/4″-12, 2″-12, 1/4″-20 – 3/8″-16, 5/16″-18 – 3/8″-16, 3/8″-16 – 1/2″-13, 1/2″-13 – 5/8″-11, 5/8″-11 – 3/4″-10, 1/4″-20 x 1-3/4″ – Long, 3/8″-16 x 1-3/4″ – Long, 1/2″-13 x 1-3/4″ – Long, M2-0.40, M2.5-0.45, M3-0.50, M4-0.70, M5-0.80, M6-1.00, M7-1.00, M8-1.25, M10-1.50, M12-1.75, M14-2.00, M16-2.00, M18-2.50, M20-2.50, M22-2.50, M24-3.00, M27-3.00, M30-3.50, M33-3.50, M36-4.00, M42-4.50, M48-5.00, M56-5.50, M64-6.00, M6-0.75, M8-1.00, M10-1.25, M12-1.50, M14-1.50, M16-1.50, M18-2.00, M20-2.00, M24-2.00, M30-2.00 |
| Material & Finish | Aluminum, Brass, Grade 2 Plain, Grade 2 HDG, Grade 2 Zinc, Grade 5 Plain, Grade 5 HDG, Grade 5 Zinc, Grade 8 Yellow Zinc, Stainless Steel, Stainless Steel 316 |
Hex nuts in all their forms are widely used in construction and manufacturing. There are many different styles of hex nuts, including finished hex nuts, acorn nuts, lock nuts, and heavy hex nuts. They are available in many different grades of metal, with different finishes, and with coarse or fine threads.
Related Products
-
Read MoreQuick ViewHex Cap Screws, Grades 2
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-2.
-
Read MoreQuick ViewMachine Screws
Machine screws are meant to hold two metal work pieces together, with the use of a threaded pre-tapped hole, or through a hole and held with a nut. They are threaded the entire length of the shank. For most styles of a machine screw, the length is measured from under the head to the end of the screw. For flat head machine screws, since they are intended to fit into a countersunk hole, their length is measured from the top of the screw head to the end of the screw.
-
Quick ViewAluminum Key Hole Washer
Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.
-
Quick ViewBuildex Trugrip Roof Screw, 1″
Buildex® TrueGrip timber screws are suitable for fixing metal roofing into both hardwood and softwood timber battens. Their sharp point prevents screw-walking when starting to insert them. They also engage the material faster, and need less effort, for a safer installation environment.
-
Read MoreQuick ViewLock Washers
-
Read MoreQuick ViewHex Cap Screws, Grades 8
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-8.
-
Read MoreQuick ViewT-Nuts
T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.
-
Read MoreQuick ViewF-Track Bolts
The square head of these F-Track Bolts fits perfectly into all flat and angled storm panel F-Track.
-
Read MoreQuick ViewMro Thread-Locker, 50ml Bottle
MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals. -
Read MoreQuick ViewAll Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy.
