Mag-Bit Hack Saw Blades
MAG-BIT hack saw blades are ready to cut through pipe, tubing, and solids. Cuts wood, plastic, or any machinable metal including conduit, stainless steel tubing, copper tubing, structural materials, and angle iron.
With blade options of 14, 18, 24, or 32 Teeth Per Inch (TPI), these blades will let you finish your job quickly.
- Additional information
- Description
Additional information
| Teeth Per Inch | 14 TPI, 18 TPI, 24 TPI, 32 TPI |
|---|
MAG-BIT hack saw blades are ready to cut through pipe, tubing, and solids. Cuts wood, plastic, or any machinable metal including conduit, stainless steel tubing, copper tubing, structural materials, and angle iron.
With blade options of 14, 18, 24, or 32 Teeth Per Inch (TPI), these blades will let you finish your job quickly.
Related Products
-
Makita 7-1/4″ Rear Handle Circular Saw Kit, 18V X2 LXT
Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 LXT® (36V) Lithium-Ion Brushless Rear Handle 7-1/4” Circular Saw (XSR01PT). It’s powered by two 18V LXT® Lithium-Ion batteries for maximum performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like cutting sheet and dimensional lumber that traditionally called for a corded saw. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries with the XSR01PT as they use across the expansive Makita 18V LXT® cordless tool series.
-
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Makita Recipro Saw, 18V LXT
The Makita 18V LXT® Lithium-Ion Recipro Saw (XRJ04Z) combines cutting speed with convenience features for faster, more efficient cutting. It’s powered by the industry’s fastest charging 18V lithium-ion batteries, allowing users to remain in one battery platform and use the same fast-charging 18V batteries on the XRJ04Z as they use across the Makita 18V LXT® cordless tool line-up.
-
Makita 5-7/8″ Metal Cutting Saw, 18V LXT
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
-
Makita Compact Recipro Saw, 18V LXT
The 18V LXT® Lithium-Ion Cordless Compact Recipro Saw (XRJ01Z) is a versatile cutting solution that combines variable speed and 1/2” stroke length with an exclusive dual-position on/off switch that allows for either paddle or trigger switch operation. Contractors get faster, more efficient cutting along with the convenience of “tool-less” blade changes and a fast charge time.
-
Makita Subcompact Recipro Saw, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The XRJ07ZB is a sub-compact solution for cutting and demolition applications in tight spaces.
-
Makita 6-1/2″ Subcompact Circular Saw, 18V LXT
The Sub-Compact 6-1/2” Circular Saw has a compact and ergonomic design at only 10-5/8” and 6.4 lbs. The compact size combined with the Makita-built brushless motor delivers up to 5,000 RPM and a superior power-to-weight ratio. The saw is equipped with Makita’s Automatic Speed Change™ technology, which adjusts cutting speed and torque under load for optimum cutting performance. The efficient brushless motor is electronically controlled to provide up to 50% longer run time than non-brushless motors, and in run-time testing the XSH04 made up to 174 cross-cuts per charge in 2×10 SPF lumber using one 5.0Ah battery.
-
Makita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
-
Makita 14″ Chop Saw Kit, 18V X2 LXT
The Makita 18V X2 LXT® (36V) Brushless 14″ Cut-Off Saw is a cordless metal-cutting solution ideal for light gauge metals including stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The BL™ Brushless Motor eliminates carbon brushes so it runs cooler and more efficiently for longer life. The Saw is powered by two 18V LXT batteries for maximum cordless performance, and delivers 3,800 RPM for the most demanding metal cutting applications. It will cut up to 5″ round and 4” x 7-5/8” rectangular tubing.
-
Makita 10″ Table Saw with Stand
Makita’s 10” Contractor Table Saw with Portable Stand is a versatile and powerful table saw for use in the shop or on the jobsite. It combines a range of convenience and ease-of-use features with large capacity and 15 AMP power, making it a true best-in-class table saw for a range of professional applications. The portable stand is jobsite tough for easy transport.
The 2705X1 is a versatile and powerful table saw for use in the shop or on the job site. It’s engineered for remodelers, furniture makers, finish carpenters, cabinet installers, decking and flooring contractors, and general contractors seeking a best-in-class 10” Contractor table saw for the jobsite or on the benchtop.



















