Euroboor Drill Chuck Connection, Morse Taper to Threaded
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2″-20 threaded post, ready for any threaded chuck to be attached.
- Description
The Euroboor 1/2UNF-MC3 chuck adapter converts the standard Morse Taper socket on a Euroboor Mag-Drill, to a 1/2"-20 threaded post, ready for any threaded chuck to be attached.
Related Products
-
Spade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
HSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -

Read MoreQuick ViewEuroboor HCS 1″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 1″ with a drill depth of 1″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 1″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 1″ from penetrating the second layer of material.
-
Bit Holder

Made from S2 modified shock resistant steel for professional performance and durability. Patented spiral torsion zone absorbs impact and extends bit life. Made with a high strength industrial magnet for securing your bits.
-
Ship Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Read MoreQuick ViewPaddle Bits, Individual
Paddle bits, also called spade bits, have a wide, flat blade. They are commonly used by tradesmen such as electricians and plumbers for drilling holes through studs in walls for running wiring or pipes (auger bits and hole saws are also used for this), but they also have a place in the woodshop for drilling on fine woodworking projects.
An extension kit is available for the extreme jobs. It includes a 12″ extension shaft, and a bent-hex tool to securely tighten the retaining screws when the paddle bit is installed. (See image.) -

Read MoreQuick ViewEuroboor HCL 2″ Weldon HSS Annular Cutter
High Speed Steel Annular Cutters 2″ with a drill depth of 2″ feature unique teeth geometry, provide clear cutting, fast feed rate, less vibration, smooth hole surface and long tool life. These HSS annular cutters – 2″ can be widely used in drilling steel, copper, aluminum, stainless steel and plastic, in either plate or pipe form. HSS Euroboor annular cutters feature teeth geometry which is optimized for use on single layer metal work pieces, ensuring the fastest and best drill performance. The rest material created with the use of these annular cutters is the signature Euroboor slug. The rim on this slug is exactly what prevents our HSS annular cutters – 2″ from penetrating the second layer of material.
-
Impactech Phillips Insert and Power Bits

Made from S2 modified shock resistant steel for professional performance and durability. Featuring a patented spiral torsion zone absorbs impact and extends bit life. Proprietary precision CNC machined tips for excellent fit in fastener recess. Tested to outperform all leading brands in lifecycle and tip failure testing. -
“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.












