Tenryu Green Framing Blade for Wet Wood or Pressure Treated Lumber
POWER TOOL SERIES
Power Tool Series for the Contractor
Exceptional features and superior quality, Thin Kerf
TENRYU’s comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4″ to 12″ for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.
- Description
- Features
POWER TOOL SERIES
Power Tool Series for the Contractor
Exceptional features and superior quality, Thin Kerf
TENRYU's comprehensive line of blades for portable and stationary power tools. More variety, better quality and greater value. Sizes range from 4" to 12" for most types of applications. The TENRYU PT SERIES goes on to include thin kerf wood cutting blades designed especially for smooth cuts on miter and slide-compound.
BLADE FEATURES:
Fully hardened, expertly tensioned tool steel bodies absorb impact, remain flat and true, and resist excess heat build-up.
High-grade, C-3, fine-grain tungsten carbide tips resist erosion for extended blade life.
Aggressive rake angles for maximum cutting speed and efficiency.
Each tip is precision honed on all four exposed surfaces. This minimizes micro-chipping along the sharp edge of the blade and results in a sharper, longer-lasting edge.
Thin kerf for less waste and lighter cutting performance (reduced feed pressure).
Inserted tooth design on some models greatly increases the body-to-tip braze area for greater support and tip strength.
Expansion slots and/or variable pitch gullets keep blade cool under stressful work loads.
Can be resharpened for extended blade life.
Related Products
-
Read MoreQuick ViewBi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal. -
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Read MoreQuick View
Makita 2-Speed Recipro Saw, 18V LXT
Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V LXT® Lithium-Ion Brushless Recipro Saw (XRJ05). It has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. The XRJ05 is equipped with efficiency features for faster cutting. The long 1-1/4” stroke length increases cutting efficiency, and the refined crank mechanism design minimizes blade deflection and reduces vibration. Convenience features include an L.E.D. light to illuminate the line of cut, a retractable tool hook, and “tool-less” blade change for faster blade installation and removal.
There are 2 feature models of the XRJ05 Recipro Saw. The choice is with or without two batteries and rapid charger. Options for the Makita XRJ05 are:
- XRJ05Z: Tool only
- XRJ05T: Tool, (2) 18V LXT® Lithium-Ion 5.0Ah batteries, rapid charger, and tool case
-
Read MoreQuick View
Cut Off Wheels, Concrete
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
These cut-off wheels are specifically designed to cut concrete, masonry, and stone. -
Quick View
Exact Cermet Carbide Blade, 6-1/2″
The Exact pipe cutting system improves pipe cutting beyond comparison. Not only do Exact pipe cutters complete the work in a fraction of the time taken by alternative methods, but the quality of the finished cut is so clean and straight that normally no extra shaping or reworking is required. The pipe cutters are light and easily carried, enabling the work to be performed wherever it is needed.
Cermet 165: Blade with ceramic tips alloy for heavy duty applications, especially for cutting stainless and acid proof steel. Cermet blades can be sharpened a couple of times so they will become like new.6-1/2 CERMET CARBIDE BLADE FOR 360E STEEL-STAINLESS-COPPER-PLASTIC 900
-
Quick View
Makita Multi Tool Kit w/ Cord
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding. -
Read MoreQuick View
Makita Bandsaw Blades, 44-7/8″
Makita’s Portable Band Saw Blade features bi-metal construction that lasts longer than carbon blades for added user convenience and value. They make clean, quick cuts in a wide variety of applications including cutting all thread, rebar, pipe and channel. For use cutting a wide variety of materials including mild steel, aluminum and stainless steel.
-
Quick View
Makita 16 Gauge Nibbler, 18V LXT
The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface. -
Read MoreQuick View
Cut Off Wheels, Large Diameter
As the name implies, cut off wheels are designed to cut through solid materials such as metal, stainless steel, concrete, stone, or a combination of such material. Similar in structure to a thicker grinding wheel, cut off wheels are thin and are used edge-on to cut through the material.
-
Quick View
Makita Straight Metal Shear, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 18 Gauge Straight Shear (model XSJ01) combines high speed, compact size and less weight. The XSJ01Z has a Makita-built 4-pole motor that delivers 2,800 strokes per minute (SPM) for faster cutting. The tough double-cut shear design handles up to 18 gauge mild steel and 20 gauge stainless steel for straight or scribe cuts without deforming the material. The swivel shear head rotates 360 degrees for increased cutting options. yet it weighs just 5.3 lbs. for better control in cutting steel and stainless steel sheet metal.
The XSJ01Z is a powerful yet compact metal shear built for any professional user seeking a best-in-class compact cordless metal shear for metalworking tasks.
