MAXXEON Magnetic Base
Powerful Neodymium magnetic base attaches to the nylon handle. It will securely fasten the WorkStar® 5400 to any ferrous metal surface with a pull force of 150 lb.
MAXXEON MXN10085 Workstar 5000 Series Magnetic Base
- Description
Powerful Neodymium magnetic base attaches to the nylon handle. It will securely fasten the WorkStar® 5400 to any ferrous metal surface with a pull force of 150 lb.
MAXXEON MXN10085 Workstar 5000 Series Magnetic Base
Related Products
-
Quick ViewMakita DML811 Work Light, AC & 18V LXT
The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting. -
Quick View
Makita 3.0HP Big bore air compressor
Makita’s 3.0 HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport.
The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. -
Quick View
Makita Brushless Robotic Vacuum, 18V X2 LXT
The 18V X2 LXT® Brushless Robotic Vacuum is a cordless solution that automatically cleans large flooring spaces in commercial environments. The DRC200Z features an efficient brushless motor engineered for extended run time and longer tool life. Just turn it loose with two fully-charged 18V LXT® Lithium-Ion 5.0Ah batteries (sold separately) and it will clean approximately 5,380 sq.ft. of hard flooring (or up to 200 minutes of continuous operation in “Main Brush plus Vacuum” mode).
-
Quick View
Makita Xenon Black Flashlight, 18V LXT
The 18V X2 LXT® Lithium-Ion Cordless/Corded Work Light (DML809) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 10,000 lumens of light, and 2,000 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
The fast-charging 18V LXT® Lithium-Ion 5.0Ah Battery (sold separately) delivers 8.5 hours of continuous illumination on the low setting. -
Quick View
Makita 2.1 Gallon Hybrid HEPA Dust Extractor Vacuum, 18V X2 LXT
Clean-ups just got easier with the Makita 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 2.1 Gallon Dry Vacuum. The XCV04Z offers corded or cordless operation for maximum versatility and convenience.
In cordless operation, the XCV04Z is powered by two 18V LXT® batteries for 36V power and run-time, without leaving the 18V LXT® battery platform. Using two 18V 5.0Ah batteries (sold separately), the XCV04Z delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting, with 74 CFM and 36” water lift of suction.
In corded operation, the vacuum delivers 127 CFM and 96” water lift. The 19.7′ power cord combined with the anti-static hoses (1-1/2″ x 8′ or 1” x 11-1/2′, both included) provide extended reach for fast clean-ups. -
Quick View
Makita Coffee Maker, 18V LXT
Get fresh brewed coffee wherever the job takes you with the 18V LXT® / 12V max CXT Cordless Coffee Maker (DCM501Z). No paper filters are needed, just your favorite ground coffee or single-serve pack, water, and a Makita 18V Lithium-Ion battery. It will brew up to three 5 ounce cups of coffee on a single charge of an 18V LXT 5.0Ah battery. It is also compatible with both Makita 12V max CXT® and 18V LXT® Lithium-Ion batteries.
-
Quick View
Makita L.E.D. Lantern Style Flashlight, 18V LXT
The 18V LXT® Lithium-Ion Cordless L.E.D. Lantern/Flashlight is a versatile work light providing ultra-bright illumination and convenience. There are three L.E.D. lighting modes: 360-degree lantern, 180 degree lantern, and flashlight mode. These versatile settings allow the user to select between lighting a wider area or a specific task or work surface. The fast-charging 18V LXT® Lithium-Ion 5.0Ah battery delivers 11 hours of continuous illumination on a single charge in the 360-degree lantern mode, up to 23 hours in the 180-degree lantern mode, and up to 36 hours in flashlight mode. It is fully compatible with Makita 18V Lithium-Ion batteries.
-
Quick View
Makita XRM11 Bluetooth Jobsite Speaker, 18V XLT
Users can surround themselves with music, on or off the job site, with the new Makita® 18V LXT® / 12V max CXT® Cordless Bluetooth Job Site Speaker. Two speakers can be connected to listen in true stereo sound or connect up to ten speakers wirelessly to hear music throughout the job site. The speaker delivers rich full sound from one 4″ woofer with a passive radiator and one 1.4″ tweeter.
Compatible with a 12V max CXT and 18V LXT Lithium-Ion Batteries, this radio provides more flexibility for users. An included AC Adapter offers corded operation. -
Quick View
Makita Bluetooth Jobsite Speaker, 18V XLT
Bring rich sound to wherever the job takes you with the versatile and durable 18V LXT®/12V max CXT® Lithium-Ion Cordless Bluetooth® Job Site Speaker. The XRM08B is equipped with Bluetooth® to wirelessly connect to mobile devices. In addition, it has one auxiliary port for MP3 compatibility and one USB port for charging mobile devices. For maximum versatility it can be powered by Makita 12V max CXT® or 18V LXT® Lithium-Ion batteries, or with the AC adapter jack (optional). For improved operation in harsh job site conditions the XRM08B features water and dust resistant construction, with protective bumpers for added durability.
-
Quick View
Makita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
