Makita 55″ Guide Rail for Use with Plunge Saw
The Makita 55″ Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).
- Description
- Features
The Makita 55" Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).
DESIGN : 55" guide rail for use with Makita Plunge Saw
PRECISION : Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
VERSATILITY : Ideal for ripping sheet material
APPLICATIONS : Also use with select routers and saws using router adapter (194579-2) and saw adapter (196953-0)
INCLUDES : 55" Guide Rail
- 55" guide rail for use with Makita Plunge Saw models XPS01, XPS02, and SP6000J
- Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting
- Ideal for ripping sheet material
- Alternate use with select routers and circular saws, must use with router guide rail adapter (194579-2) and saw guide rail adapter (196953-0)
Related Products
-
Quick ViewMakita Subcompact Drill /Impact /Radio Combo Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Quick ViewMakita 4-3/4″ Portable Band Saw
The Makita Portable Band Saw model 2107FZ is a compact and versatile solution for metal cutting including pipe, Unistrut®, all-thread, angle-iron, and more.
The 2107FZ is powered by a 6.5 AMP motor and delivers 200-350 ft./min., with a variable speed control dial that allows the user to match the speed to the application. Additional features include a blade tightening lever for fast and easy blade installation, dual ball bearing guides for precision cutting, and a built-in high-output fluorescent light to illuminate the cutting area. It’s engineered with a no lock-on feature, so the saw turns off when the switch is released.
-
Quick ViewMakita 2″ Brad Nailer 18 Gauge
Makita’s 2-inch Brad Nailer features a durable and compact design with ease-of-use features including a narrow-nose design that make it ideal for a wide variety of finish applications.
The AF505N can operate from 60 to 115 PSI, and drives a range of 18 gauge brad nails from 5/8” to 2-inch. The magazine capacity is up to 100 nails, with a quick release cam-lock to open the nail guide assembly to easily clear jams. -
Quick ViewMakita 5″ Angle Grinder with SJS Tech
Makita’s 5” SJS™ Angle Grinder combines 13 AMP variable speed power with comfort and motor-protection features for longer-lasting stone grinding and polishing performance. The 9565CV is engineered with Makita’s innovative SJS™ mechanical clutch system to protect the gears for longer tool life.
The 9565CV is a versatile and powerful grinder with variable speed, allowing the user to set the RPM to the material. The variable speed control feature makes the 9565CV ideal for stone work, including polishing and grinding. -
Quick ViewMakita Couple Shaft Bristle Brush Attachment 23-5/8″
The Makita Bristle Brush Couple Shaft Attachment is the perfect accessory for Makita 18V X2 LXT (36V) and MM4 4-Stroke Engine Couple Shaft Power Heads (sold separately). The Bristle Brush Couple Shaft Attachment features a wide sweeping surface of 23-5/8” and durable nylon bristles for optimum performance. The steel drive shaft reduces vibration and increases equipment life.
-
Quick ViewMakita Sub‑Compact 2‑Pc Combo Kit, 18V LXT
-
Quick ViewMakita Subcompact Impact /Hammer Drill Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX202RB is a combo kit with two 18V Sub-Compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless hammer driver-drill with two speed settings that weighs only 2.8 lbs. The percussive hammer-drill setting allows for drilling into masonry and brick. The variable speed brushless impact driver has two speed settings and weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries,which feature an integrated L.E.D. battery charge level indicator.
-
Quick ViewMakita 3/8″ Angle Drill w/Cord Paddle Switch
With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.
-
Quick ViewMakita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Quick ViewMakita Multi‑Tool Kit
