- Additional information
- Features
Additional information
| Size | 1/2, 5/8, 3/4 |
|---|
Carbide Tipped Countersinks and Counterbores
Carbide tipped countersink, counterbore & plug cutter sets for the following uses:
- Drilling & countersinking with a single tool
- Concealing of screw heads with plugs which fit perfectly with countersink
- Removing the burr left from a drilling or tapping operation
Related Products
-
Read MoreQuick ViewEuroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Hot
Quick ViewThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Quick ViewHeavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
-
Quick ViewTCT 165 General Use Blade
TCT 165: Blade with tungsten carbide tips for general use. Suitable for cutting steel, copper, aluminum and plastics. TCT blades can be sharpened a couple of times so they will become like new.
-
Quick ViewProferred High Speed 29 Pc Index 135 Degree Split Point Cutting 900
-
Quick ViewSpade Drill Bits
Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in 1/4″ – 1-1/2″.
-
Quick View“Silver & Deming” Drill Bits
One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.
-
Quick ViewProferred Cobalt 29 Pc Index Bullet 135 Degree Split Point Cutting 900
-
Quick ViewMag-Bit 624 Hole Saws
Cuts holes in wood, plastic, or any machinable metal, including nail-embedded wood, plywood, pipe, stainless steel etc. 9/16″ – 6″ – 624 HOLE SAWS – BI-METAL VARI-PITCH 4/6 TPI, 1-3/4″ DEPTH
When drilling metals, use a cutting compound such as MAG-LUBE concentrated cutting fluid.
-
Quick ViewDiamond X140
Heavy duty special diamond blade only to be used for cutting cast iron and ductile pipes.
