Dust Mask, Single Band
Nuisance dust mask, not NIOSH approved with one elastic strap and adjustable aluminum nose piece. 50 per box.
- Description
Nuisance dust mask, not NIOSH approved with one elastic strap and adjustable aluminum nose piece. 50 per box.
Related Products
-
Quick ViewMakita 1″ SDS+ HEPA Rotary Hammer Pistol Grip
The Makita 1” AVT® Rotary Hammer with HEPA Dust Extractor (model HR2651, with Pistol Grip) is a total solution that combines efficient drilling and chipping with reduced vibration and improved dust extraction. The HR2651 is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. It has a built-on dust extractor that captures concrete dust during drilling. The HR2651 combines these performance features in a compact size. It is ideal for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more.
-
Quick ViewMakita Quiet Series Air Compressor, 1.5 HP, 3 Gallon
Compressors are workhorse tools on the job site and in the work shop. Makita® Air Compressors are favorites for their faster recovery time, lower noise, longer tool life, and consistent performance.
The Makita® Quiet Series 1-1/2 HP, 3 Gallon, Oil-Free, Electric Air Compressor (MAC320Q) features a Quiet Series Design, combining strong performance with lower noise. At only 60 dBA, it’s ideal for indoor use during case and base installation, trim and finish carpentry, cabinet or furniture making, and more. The MAC320Q runs at a lower RPM, resulting in longer motor and pump life. It is powered by an efficient 1-1/2 horsepower induction motor that provides up to 90 PSI. It also features a lightweight design (only 52.5 lbs.) for increased portability. -
Quick View
Makita 2.1 Gallon Hybrid HEPA Dust Extractor Vacuum, 18V X2 LXT
Clean-ups just got easier with the Makita 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 2.1 Gallon Dry Vacuum. The XCV04Z offers corded or cordless operation for maximum versatility and convenience.
In cordless operation, the XCV04Z is powered by two 18V LXT® batteries for 36V power and run-time, without leaving the 18V LXT® battery platform. Using two 18V 5.0Ah batteries, the XCV04Z delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting, with 74 CFM and 36” water lift of suction.
In corded operation, the vacuum delivers 127 CFM and 96” water lift. The 19.7′ power cord combined with the anti-static hoses (1-1/2″ x 8′ or 1” x 11-1/2′, both included) provide extended reach for fast clean-ups.
-
Quick View
Makita 5″ Random Orbit Sander, 18V LXT
The 18V LXT® Lithium-Ion Cordless 5″ Random Orbit Sander (model XOB01Z) delivers increased efficiency and mobility to woodworkers. The XOB01Z features three speed settings, superior ergonomics and up to 40 minutes of run time on a single charge. Match the speed to the application with three speed settings (7,000/9,500/11,000 OPM), which are easily changed with a one-touch electronic control switch. The large 1/8” random orbit action is engineered for efficient sanding, fast material removal, and a swirl-free finish. The pad brake reduces free-spin for improved overall finish, and a control system regulates pad speed at start-up. The XOB01Z uses quick-change 5” (8-hole) hook-and-loop abrasive paper for increased versatility.
-
Quick View
Makita Dust Extraction Cup
The Makita Dust Extracting Cup Set attaches to the nose of select Makita rotary hammer for convenient dust extraction. The clear, flexible boot allows the user to easily see where they are drilling. This cup set is ideal for drilling overhead into concrete.
-
Quick View
Makita 12″ Dual Bevel Sliding Compound Miter Saw
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).
-
Quick View
Makita 11/16″ SDS+ AVT Rotary Hammer, 18V LXT
18V LXT® Brushless Cordless 11/16″ AVT® Rotary Hammer (XRH12Z) is a cordless concrete solution that accepts SDS-PLUS bits, and features AWS™ capability for maximum efficiency and convenient dust extraction. The efficient HEPA filter captures 99.97% of particulates .3 microns and larger. The compatible On-Board Dust Extractor Attachment with HEPA Filter is OSHA Table 1 compliant. It’s powered by 18V LXT® technology and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord.
-
Quick View
Makita Dust Extraction Kit
The Makita Dust Extraction Attachment (196537-4) is engineered to reduce the dust created from concrete drilling when used with a jobsite vacuum. The Dust Extraction Attachment fits the Makita 1-9/16″ AVT® Rotary Hammer model HR4013C.
The 196537-4 includes both drilling and demolition boots for greater versatility and multiple applications. The Dust Extraction Attachment is part of Makita’s expanding line-up of dust extraction solutions, including the VC4710 Jobsite Vacuum. -
Quick View
Makita Dust Extraction Cup, HEPA Compliant
There is increasing awareness of dust extraction in concrete applications, so get the right accessory for your Makita cordless rotary hammer. The Dust Extraction Cup is for use with Makita Rotary Hammers, models RH01Z and XRH06Z (sold separately). The Cup attaches quickly and easily for added user convenience, and the clear boot allows the user to clearly see where they are drilling. It is ideal for overhead drilling applications.
-
Quick View
Makita Dust Extraction Shroud, 7″
The Makita Dust Extracting Surface Grinding Shroud (195368-6) is designed to fit Makita 7 in. grinders. It features a spring-loaded suspension system that keeps the shroud flush to the surface during movement and compensates for blade wear. The shroud has a removable edge piece for surface work flush to edges or other objects. It also has soft brushes that help contain the dust and allow for smooth movement over the work surface.
