CMT 1-3/16″ Multi-Tool Blade
CMT 1-3/16″ (30mm) Multi-Tool Blade.
BiM Starlock fine cut for metal.
Bulk Purchase Item.
- Description
OMF157
Related Products
-
Read MoreQuick ViewMag-Bit Hack Saw Blades
MAG-BIT hack saw blades are ready to cut through pipe, tubing, and solids. Cuts wood, plastic, or any machinable metal including conduit, stainless steel tubing, copper tubing, structural materials, and angle iron.
With blade options of 14, 18, 24, or 32 Teeth Per Inch (TPI), these blades will let you finish your job quickly. -
Quick ViewMakita 7-1/4″ 24 T Carbide Saw Blades, 10 Pack
The 7-1/4 in. 24T Carbide-Tipped Max Efficiency Ultra-Thin Kerf Framing Saw Blade is ideal for a framers using cordless circular saws for a full range of wood cutting applications. The ultra-thin kerf design (only 0.057 in.) and specially engineered blade teeth to assist in reducing the load put on the tool while cutting, with a reduced swing width that allows for smoother material removal with less cutting resistance. The result is increased cutting efficiency, and users get up to 70% faster cutting and up to 70% more cuts per charge compared to standard blades.
The high grade Tungsten Carbide tips are engineered for improved durability and longer blade life, and the special ATAFR (Alternate Top Alternate Face with Raker) carbide tips provide smoother and caster cuts. Added features including a blade coating for reduced pitch build-up. -
Quick ViewMakita XGT 40V Recipro Saw
The 40V max XGT® Recipro Saw Kit (GRJ01M1) delivers faster cutting speed for cutting and demolition applications. Makita-built variable 2-speed brushless motor delivers 0-2,300 (low) and 0-3,000 (high) strokes per minute. XGT® technology delivers up to 145 cuts per charge in 2×10 SPF lumber using one XGT 4.0Ah Battery.
-
Quick ViewMakita XGT 40V Rear Handle 7-¼” Circular Saw
The Makita 40V max XGT® Rear Handle 7-1/4” Circular Saw Kit (GSR01Z) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,400 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-9/16”. This saw is ideal for framers, builders, roofers, forming, and more.
The GSR01Z offers 56-degrees bevel capacity with positive stops at 22.5-degrees and 45-degrees and a bevel up to 56-degrees. The saw features an electric brake for maximum productivity and a die-cast magnesium base. Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance.
XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
-
Quick ViewMakita 8-PC Combo Kit, 3.0AH, 18V LXT
This MAKXT801X1 combo kit includes 8 Makita® 18V LXT® Cordless Products:
The Compact ½” Driver-Drill (XFD10Z) delivers power and performance that delivers 480 in.lbs. of Max Torque, and 25% more speed than the previous model.
The Impact Driver (XDT11Z) delivers power and speed in a compact size for a full range of driving and fastening tasks.
The 6-1/2” Circular Saw (XSS02Z) with a high-torque motor produces 3,700 RPM for faster cutting.
The Compact Recipro Saw (XRJ01Z) is a versatile cutting solution that combines variable speed and 1/2” stroke length with an exclusive dual-position on/off switch that allows for either paddle or trigger switch operation.
The 5″ Random Orbit Sander (XOB01Z) features three speed settings, superior ergonomics and up to 40 minutes of run time on a single charge. The large 1/8” random orbit action is engineered for efficient sanding, fast material removal, and a swirl-free finish.
The Sub-Compact Brushless 3/8” Square Drive Impact Wrench (XWT12ZB) is ideal for working in tight spaces and for overhead applications. It has variable two-speed with 0-1,300/0-2,400 RPM and 0-2,000/0-3,600 IPM and up to 130 ft.lbs. of Max Torque.
The Blower (DUB182Z) is a go-to clean-up tool and a favorite on job sites and in workshops.
The LED Flashlight (DML815) provides high illumination at 160 lumens.
Rounding out this kit is the DC18RC Rapid Optimum Charger, 2 3.0Ah 18V LXT® batteries, and a tool bag to carry it all. -
Quick ViewMakita 6-1/2″ 24T Carbide Framing Saw Blade
The Makita 6-1/2″ 24 Tooth Carbide-Tipped Circular Saw Blade has an efficient 24 tooth design. The ultra-thin kerf creates less drag on the motor and minimizes material lost. Carbide tooth design is engineered for quality cuts and longer life.
-
Quick ViewMakita Drywall Cut out Saw Blade, 2 Pack
The Makita Cut-Out Saw Blade is the right accessory for straighter, more accurate cutting in installed drywall. When used with the Makita 18V LXT® Lithium-Ion Cordless Cut-Out Saw XDS01Z, the B-49703 blade is ideal for cut-outs and repair applications. The blades have depth markings for easier adjustments, and will cut drywall board up to 1-3/16” thick. For longer performance life, the blades are constructed with durable High Carbon Steel (HCS).
-
Quick ViewMakita 5-7/8″ 60T Blade, for Stainless Steel
The Makita 5-7/8″ 60T Carbide-Tipped Metal Cutting Saw Blade is the ideal accessory for the Makita XSC02 or XSC04 18V LXT® Lithium-Ion 5-7/8″ Cordless Metal Cutting Saws. The Makita Metal Cutting Saw Blade has an ultra-thin kerf design that provides smoother cuts with less drag on the motor and minimal material loss. It is ideal for cutting Stainless Steel.
-
Quick ViewMakita XGT 40V Recipro Saw Kit
The 40V max XGT® Recipro Saw Kit (GRJ01M1) delivers faster cutting speed for cutting and demolition applications. Makita-built variable 2-speed brushless motor delivers 0-2,300 (low) and 0-3,000 (high) strokes per minute. XGT® technology delivers up to 145 cuts per charge in 2×10 SPF lumber using one XGT 4.0Ah Battery.
-
Read MoreQuick ViewBi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal.
