Mortar Chisel
Mortar Chisels are used to dress seams between tiles or masonry pieces, especially to remove old mortar.
- Description
Mortar Chisels are used to dress seams between tiles or masonry pieces, especially to remove old mortar.
Related Products
-
Read MoreQuick ViewMakita XGT 40V 1-9/16” Rotary Hammer, SDS-MAX
The Makita 40V max XGT® 1-9/16” AVT® Rotary Hammer (GRH05) is a cordless concrete solution designed for heavy-load applications. It accepts SDS-MAX bits, and it delivers the power, speed, and run-time for corded demands, without the cord. Constant speed control automatically applies additional power under load for optimum performance.
The GRH05 features Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT®), which is an internal counterbalance that moves counterweight pistons in the opposite direction of the drive piston to actively reduce vibration.
XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 2 feature models of the GRH05 Rotary Hammer. The choice is with or without one battery and rapid charger. Both models come with standard accessories of side handle, grease, and towel. Options for the Makita GRH05 are:
- GRH05Z: Tool only, with accessories
- GRH05M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger, tool case, and accessories
-
Read MoreQuick View
Ground Rod Driver
As the name implies, Ground Rod Drivers are used to drive grounding rods into the earth. Using a rotary hammer with either the SDS-Max shank or the Spline shank, is far easier than driving the rods by manual effort.
-
Quick View
Makita 1-9/16″ SDS MAX Rotary Hammer w/Cord, 10 AMP
The Makita 1-9/16″ Rotary Hammer (model HR4002) has a powerful 10 AMP motor that delivers 2,500 BPM for the most demanding applications. The HR4002 includes a torque limiting clutch that is engineered to prevent gear damage by automatically disengaging gears if the bit binds. The “no hammering when idling” function helps increase tool life, and the soft grip handle provides increased comfort on the job.
-
Quick View
MAKITA 1-1/8″ SDS+ ROTARY HAMMER W/CORD
The 1-3/16” Rotary Hammer (HR3001CK) is engineered for performance and power. It has a 7.5 AMP motor that delivers 2.6 ft.lbs. of impact energy to handle the most demanding applications.
The 3-mode operation offers “rotation only”, “hammering with rotation” or “hammering only” for multiple applications. Modes can be easily changed with a recessed hammer-function selector, which is located below the gear housing for improved durability.
The L-shaped body design brings the operator closer to the application for increased accuracy. A vibration-absorbing back handle and rubberized soft grip provides increased operator comfort.
-
Quick View
Makita 11/16″ SDS+ AVT Rotary Hammer, 18V LXT
18V LXT® Brushless Cordless 11/16″ AVT® Rotary Hammer (XRH12Z) is a cordless concrete solution that accepts SDS-PLUS bits, and features AWS™ capability for maximum efficiency and convenient dust extraction. The efficient HEPA filter captures 99.97% of particulates .3 microns and larger. The compatible On-Board Dust Extractor Attachment with HEPA Filter is OSHA Table 1 compliant. It’s powered by 18V LXT® technology and an efficient brushless motor for maximum power, speed and run-time for corded demands, without the cord.
-
Quick View
Makita 1″ SDS+ Rotary Hammer HEPA Kit, 18V LXT
The 18V LXT® Lithium-Ion Brushless 1” Rotary Hammer with HEPA Dust Extractor Attachment (model XRH011TX) combines Makita BL™ Brushless Motor Technology with concrete dust extraction – without the cord. The XRH011TX was the industry's first 1″ capacity rotary hammer in the 18V category, and sets new standards in the cordless tool category. XRH011TX is an OSHA Table 1 compliant concrete drilling solution when used in conjunction with Filter Cleaning Mechanism Dust Case (part #199588-6).
-
Quick View
Makita 1″ SDS+ Rotary Hammer w/D-Handle
The Makita 1” AVT® Rotary Hammer (model HR2641, with D-Handle) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2641 combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.
The HR2641 is engineered for a range of applications including overhead drilling into concrete, wood and metal, removing tile, and more. It is ideal for a range of trades including masons, plumbers, electricians, sprinkler installers, city maintenance crews, and general contractors seeking a best-in-class 1” rotary hammer. -
Quick View
Makita Dust Extraction Cup, HEPA Compliant
There is increasing awareness of dust extraction in concrete applications, so get the right accessory for your Makita cordless rotary hammer. The Dust Extraction Cup is for use with Makita Rotary Hammers, models RH01Z and XRH06Z (sold separately). The Cup attaches quickly and easily for added user convenience, and the clear boot allows the user to clearly see where they are drilling. It is ideal for overhead drilling applications.
-
Quick View
Makita 1-9/16″ SDS Max AVT Rotary Hammer w/Cord
The 1-9/16” AVT® Rotary Hammer (model HR4013C) has 45% less vibration and 20% more impact energy than the previous model. It is engineered with enhanced Anti-Vibration Technology (AVT®), a synchronized three-component system for significantly less vibration. The result of the enhanced AVT® is a category-leading vibration rating of 5m/s².
The powerful 11 AMP motor delivers 8.4 ft. lbs. (11.4 Joules) of impact energy, 20% more than the previous model for faster drilling. An added feature is the option of lock-on or trigger-activated in the “chipping only” mode, with a push button start/stop control for more convenient operation.
-
Quick View
Makita 1″ SDS-PLUS Rotary Hammer, 7AMP, AVT®
The Makita 1” AVT® Rotary Hammer (model HR2611F, with Pistol-Grip) is engineered with Anti-Vibration Technology (AVT®), an internal counterbalance system for significantly less vibration. The HR2611F combines performance and power with less vibration in a compact size, and is ideal for a range of applications including overhead drilling.
