Toggler Alligator Anchor
ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors … but also hold securely when they encounter an unexpected cavity, such as in hollow brick or hollow block, or even in drywall or, especially, in tile over drywall. The specially formulated polypropylene body flows into and locks up with any undercuts in the hole, bonding the screw to the wall and sealing the hole to prevent moisture from entering. Optimal holding values [measured in tons] are obtained in highly dense substrates by using a screw diameter and a drill diameter of the same size as the anchor diameter. The anchor is available both unflanged for push through mounting and with a flange for use where a cavity is anticipated (drywall, hollow brick, etc.).
- Additional information
- Description
- Data Charts
- Data Sheets & Downloads
Additional information
| Size & Type | 1/4″ w/Flange, 5/16″ w/Flange, 3/16″ w/Flange, 1/4″ w/o Flange, 5/16″ w/o Flange, 3/16″ w/o Flange |
|---|
ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors ... but also hold securely when they encounter an unexpected cavity, such as in hollow brick or hollow block, or even in drywall or, especially, in tile over drywall. The specially formulated polypropylene body flows into and locks up with any undercuts in the hole, bonding the screw to the wall and sealing the hole to prevent moisture from entering. Optimal holding values [measured in tons] are obtained in highly dense substrates by using a screw diameter and a drill diameter of the same size as the anchor diameter. The anchor is available both unflanged for push through mounting and with a flange for use where a cavity is anticipated (drywall, hollow brick, etc.).
Key Features & Benefits
- Strongest in solid materials — holds up to 2x more than metal, adhesive, epoxy and chemical anchors with the same screw diameter and embedment depth
- Anchor bonds screw to concrete, brick & stone — sealing the hole against moisture
- Versatile — holds securely even in hollow walls or ceilings
- Uniquely shaped head prevents spinning & countersink
- Accepts greatest range of screw sizes in each anchor
- High holding strength even with deviations in screw size and hole diameter, where other anchors fail entirely
- Resists vibration & shock • Non-toxic • Sets instantly
- Screw can be removed and reinserted in same anchor without loss of holding power
- Corrosion-proof when used with stainless steel screws
Specifications
Installation Data
Performance Data & Pull-Out Values
Related Products
-
Read MoreQuick ViewHollow Wall Anchor, Long and Short
The sleeve type hollow wall anchor is designed for use in base materials such as plaster, wallboard, concrete block, hollow tile or plywood. It is installed using a drill and can be used with various wall thicknesses. The sections of the sleeve expand as the screw is tightened and driven into the wall. The front section of the hollow wall anchor will add permanent screw threads, so that once set, the screw may be removed as often as necessary without affecting the anchor.
These anchors are also known as Molly bolts. -
Read MoreQuick ViewGrey Plastic Anchor, No Lip
This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs. This type has no outer ring or lip that remains outside the pre-drilled hole, so there will not be any plastic visible once the screw is in place. Also, whatever is being attached to the wall will sit directly against the wall, with no gap.
-
Read MoreQuick View
Knurled Track Pin
The Ramset 3/4 in. Drive Pins are ideal for fastening track in concrete and can be used to penetrate dense concrete and structural-quality steel. The pins are specifically fabricated for toughness and durability.
-
Read MoreQuick View
Threaded Stud
Threaded studs are available in a variety of thread and shank lengths for use in concrete, some types of concrete block, and A36 or A572 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required or for suspending sprinkler systems.
The threaded studs have a specially designed point to allow proper penetration into the base material. A plastic flute is mounted over the point to retain the drive pin in the fasteners guide of the tool providing guidance during the driving operation. A plastic cap is also provided to protect the threads of the fastener during the driving process as well as providing guidance during installation. -
Quick View
1-1/4″ Ceiling Clip Assembly
The Ramset Ceiling Clip is designed to mount into a slanted ceiling, with hanging wire attached through the eye. Able to support light loads such as suspended ceiling grids.
-
Read MoreQuick View
Anchor Setting Tool Powder Load, .22 Caliber
Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These .22 caliber powder loads provide the force needed to drive those fasteners into place. This level is the lightest available, for smaller fasteners and thinner materials.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. -
HotQuick View
Original Wej-It® Wedge Anchors
The Wej-It original Wedge Anchors are time tested with proven reliabilty and has been an industry standard for over 60 years.
-
Read MoreQuick View
Pipe Spike
Powers Pipe SPIKE® is ideal for ceiling applications where hanging threaded rod is needed.
The SPIKE® anchor is a patented, one-piece, tamper-proof vibration resistant anchor for use in concrete, block, brick or stone. Several head styles and anchor materials are available. The SPIKE® anchor is formed with an “s” shaped configuration at the working end of the anchor to create an expansion mechanism. Since the anchor is pre-expanded, there is no secondary tightening operation required which greatly reduces the overall cost of an anchor installation. -
Read MoreQuick View
Grey Plastic Anchor, w/Lip
This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs.
-
Read MoreQuick View
Plastic Anchor Kit
This kit contains standard drywall/concrete expansion anchors, screws, and a masonry drill bit sized appropriately.
Kits are available with standard Phillips pan head screws, or with slotted hex head washer screws.
Sizes are:
3/16″ Anchor & Bit, with #6 – #8 x 3/4″ Phillips Pan Head Screw
1/4″ Anchor & Bit, with #10 – #12 x 1″ Phillips Pan Head Screw
1/4″ Anchor & Bit, with #10 – #12 x 1″ Slot Hex Head Screw
