Teardrop Hanger, EG
Teardrop hangers are designed to anchor stationary, non-insulated pipes to overhead structure. The knurled insert nut attaches to threaded rod that is installed as needed, and allows the teardrop hanger to swivel to any direction to hold the pipe. The nut is retained by the teardrop hanger when opened during installation, and also allows for minor height adjustment.
This piece is electro-galvanized for basic rust protection.
- Additional information
- Description
- Loads and Dimensions Chart
Additional information
| Size | 1/2″, 3/4″, 1″, 1-1/4″, 1-1/2″, 2″, 2-1/2″, 3″, 3-1/2″, 4″, 5″, 6″, 8″ |
|---|
Teardrop hangers are designed to anchor stationary, non-insulated pipes to overhead structure. The knurled insert nut attaches to threaded rod that is installed as needed, and allows the teardrop hanger to swivel to any direction to hold the pipe. The nut is retained by the teardrop hanger when opened during installation, and also allows for minor height adjustment.
This piece is electro-galvanized for basic rust protection.
Related Products
-
Quick ViewElite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
Quick View
Elite Loop Hanger
Elite Loop Hangers are the recommended pipe support solution for the suspension of stationary non-insulated pipe lines.
-
Read MoreQuick View
Steel Eye Socket
Steel eye sockets are designed to attached hanging threaded rod to structures. Connectors, supports, and equipment can then be attached to the threaded rod as usual.
-
Read MoreQuick View
Caddy Stand-Off Strap, 2-Hole for Conduit
Two-hole stand-off straps are used for mounting CPVC pipe to a wall, ceiling, or other surface. They eliminate the need for wood blocks under the pipe. They position the pipe 1-1/2″ off the surface.
-
Quick View
4-Hole Corner Plate
This basic plate connector can be used to secure three pieces of strut together, with the ends of two pieces against a third strut between them.
-
Quick View
Concrete Insert Box, Ceiling
The concrete insert box is designed to allow attachment of threaded rod in a ceiling, and is installed before the cement is poured into the wooden form. Once the cement hardens, and the form is removed, the knockout plate is removed and a concrete insert nut is placed inside. The threaded rod is then screwed into the nut, providing support for equipment to be mounted to.
-
Read MoreQuick View
Weldless Eye Nut, Stainless Steel
Stainless steel eye nuts are threaded fasteners with a looped head that is used to secure hooks or other devices used to hang equipment from threaded rod.
Each eye nut is made of stainless steel type 316 – which makes them extremely strong and resistant to corrosion and rusting. They are excellent choices for either interior, open-air but covered, or exterior applications. -
Quick View
Elite Clevis Hanger
A clevis hanger consists of one U-shaped clevis and a second V-shaped clevis with a hole in a flattened section at the base of the V, joined together with a bolt. Clevis hangers are used as a pipe attachment providing vertical adjustment for pipes
-
Quick View
Standard Riser Clamps (6200-6300)
Model 6200-6300 Standard Riser Clamps from Elite components are designed for standard iron pipe. They are available in either galvanized or plain and in sizes from 1/2″ thru 24″.
Compares with federal specifications A-A-1192A (Type 8) and ANSI/SP-69 and SP-58 (Type 8)
-
Read MoreQuick View
Clevis Pipe Hanger, Copper
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. These hangers have a beautiful copper finish, and are excellent choice for interior open ceiling situations where their color will complement other equipment.
