Strut, 1-5/8″, Slotted, HDG
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This piece is regular size at 1-5/8″ deep, with slots on 2″ centers, and is HDG for great rust protection.
- Description
- Strut Options
Strut channel, often referred to as Unistrut, is used for light structural support, often for supporting wiring, plumbing, or mechanical components such as air conditioning or ventilation systems.
This piece is regular size at 1-5/8" deep, with slots on 2" centers, and is HDG for great rust protection.
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers
13/16" X 1-5/8" X 20', 14GA, Slots on 2" Centers
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers, HDG
13/16" X 1-5/8" X 10', 14GA, Slots on 2" Centers, Stainless Steel
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers
1-5/8" X 1-5/8" X 20', 14GA, Slots on 2" Centers
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers, HDG
1-5/8" X 1-5/8" X 10', 12GA Heavy Duty, Slots on 2" Centers
1-5/8" X 1-5/8" X 10', 14GA, Slots on 2" Centers, Stainless Steel
1-5/8" X 1-5/8" X 10', 12GA Heavy Duty, Slots on 2" Centers, Stainless Steel
Related Products
-
Quick View3/8″ Weldless Eye Nut
Weldless steel eye nuts are threaded fasteners with a looped head that is used to secure hooks or other devices used to hang equipment from threaded rod.
-
Quick ViewElite Beam Clamp
Elite Beam Clamps are used as structural attachments to the top or bottom of metal beams, purlins, channel, or angle iron.
-
Quick View
Pipe Roof Support, Pipe Prop APS-2
The APS-2 from Pipe Prop is the standard in adjustable pipe support systems for industry professionals. The durability and reliability of a Pipe Prop product sets it apart as where homemade pipe systems are unpredictable at best.
The APS-2 serves pipes up to 2.5″ in width or smaller and allows you to determine your own heigh using 3/4” Schedule 40 PVC Electrical Conduit (cut required).
The APS-2 comes with 1 base, 1 saddle, and 1 nylon strap for securing your pipe to the saddle. -
Quick View
Concrete Insert Box, Ceiling, Galvanized
The concrete insert box is designed to allow attachment of threaded rod in a ceiling, and is installed before the cement is poured into the wooden form. Once the cement hardens, and the form is removed, the knockout plate is removed and a concrete insert nut is placed inside. The threaded rod is then screwed into the nut, providing support for equipment to be mounted to.
This version of this equipment is galvanized, and can be used in interior or exterior placements. -
Read MoreQuick View
Clevis Pipe Hanger, Plain
A clevis hanger is a pipe attachment providing vertical adjustment, consisting of a clevis type top bolted to a formed steel bottom strap. They are recommended for the suspension of non-insulated, stationary pipe lines. These hangers have a natural, or plain, black finish, and are suitable for any interior uses.
-
Read MoreQuick View
Steel Eye Socket
Steel eye sockets are designed to attached hanging threaded rod to structures. Connectors, supports, and equipment can then be attached to the threaded rod as usual.
-
Quick View
Elite Clevis Hanger
A clevis hanger consists of one U-shaped clevis and a second V-shaped clevis with a hole in a flattened section at the base of the V, joined together with a bolt. Clevis hangers are used as a pipe attachment providing vertical adjustment for pipes
-
Quick View
4-Hole Corner Plate
This basic plate connector can be used to secure three pieces of strut together, with the ends of two pieces against a third strut between them.
-
Read MoreQuick View
Pipe Clamp
A pipe clamp is an attachment which clamps around the pipe to connect it to the remainder of a pipe hanger assembly. Pipe clamps are recommended for the suspension of cold pipe lines and may or may not be insulated.
-
Quick View
7-Hole Universal Shelf Bracket
This plate connector can be used to secure a piece of strut 90° to another, or to place a protruding shelf onto strut
