Ramset Viper 4
DESIGNED FOR THE CHALLENGES OF OVERHEAD FASTENING
The industries most preferred overhead fastening tool. Its small compact design allows the contractor to reach up into very tight spaces.
- Description
- Features
- Training and Certification
DESIGNED FOR THE CHALLENGES OF OVERHEAD FASTENING
The industries most preferred overhead fastening tool. Its small compact design allows the contractor to reach up into very tight spaces.
- Easy to use, Easy to Clean
- Automatic Load Advance
- Rugged Polyamide housing
- Automatic piston return
- Overdrive protection with heavy duty buffer
- Length: 17.25”
- Weight: 4.9 lbs.
- Maximum Pin Length: 1-1/2"
- 3 Year Warranty
- .27 Caliber Strip Load
- Must use with V4 extension poles
- Viper4 Includes:
- Safety Glasses Operators Manual, Spall Guard, Two Cleaning Brushes, Carry Case
ONLINE POWDER TRAINING AND CERTIFICATION
To protect the operator and assure safety on the jobsite, OSHA and ANSI require all powder actuated tool users to be trained
and certified for the tool that will be used. Ramset enables you to receive training through our website training program.
This approach combines interactive web-based training techniques and online testing with feedback during the test.
The course consists of approximately 30 pages of usage, safety, and troubleshooting material. Upon completion of this
brief course, you will immediately take an online exam. With successful completion of the exam, you then print a Ramset
certification card.
At the end of the course, you are also given the ability to download individual tool manuals.
To take the course, and be certified to operate a Ramset powder actuated tool:
• Go to www.Ramset.com
• Find the heading called Get Your License
• Click P.A.T. Licensing
• Click Begin Operator Course (choose English / Spanish / French)
• When course is complete, take the test
• After passing the test, download and print your certificate
• Place the certificate in your wallet
Related Products
-
Quick ViewRamset TrakFast Tool
STILL THE MOST REVOLUTIONARY FASTENING SYSTEM IN THE CONSTRUCTION INDUSTRY!
Since its introduction in 1991, TrakFast has been the tool of choice for both interior and exterior contractors. The TrakFast Automatic Fastening System fastens all types of track, from standard track to hat channel, deep leg, Z, and J channel.
-
Quick View32 Pc. All Purpose Tool Kit, 1/4″
1/4″ Hex power shank tool bits for metal, wood and masonry work.
High speed steel drill bits for metal.
Carbide tipped drill bits for masonry.
CR-VA spade bits for wood. -
Read MoreQuick View
Ramset Conduit Clamp, Gas Actuated
The Ramset Conduit Clamp is used to attach conduit to concrete. Pin pre-assembled to an 18 gage conduit clamp, and is designed for use in the Ramset T3SS Single-Shot Gas Tool.
-
Read MoreQuick View
Ramset Washer Pin Fastening Systems
Designed to drive flush into steel and concrete
Consistent and optimum quality in every pin
Washer increases bearing surface against material -
Read MoreQuick View
Makita 1/2″ Mixer, 18V LXT
The Makita 18V LXT® Brushless Cordless 1/2” Mixer (XTU02) is a cordless solution ideal for mixing drywall mud, plaster, drilling large holes and much more. The variable speed trigger allows the user to adjust the speed to 0-350 RPM or 0-1300 RPM for optimum speed control for the material or application. A soft start suppresses start-up reaction for more control and better accuracy.
For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance, and a protective cover helps prevent battery contamination from mixing compound splash back.
There are 2 feature models of the XTU02 1/2” Mixer. The choice is with or without one battery and rapid charger. Options for the Makita XTU02 are:
- XTU02Z: Tool only, with side handle
- XTU02T: Tool, (1) 18V LXT® Lithium-Ion 5.0Ah battery, rapid charger, side handle, and tool bag
-
Read MoreQuick View
Anchor Setting Tool Powder Load, .22 Caliber
Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These .22 caliber powder loads provide the force needed to drive those fasteners into place. This level is the lightest available, for smaller fasteners and thinner materials.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. -
Quick View
1/2″ Combo Bit for 1/4″ Lead M/S Anchor
This 1/2″ combo drill bit installs lead anchors for 1/4″-20 combo sidewalk bolts. I works for all masonry surfaces, both block and concrete. The smaller pilot bit starts the hole in the right location, and the larger 1/2″ step bit drills the perfect hole for setting lead machine screw anchors.
Fully adjustable collar allows you to set the depth of the hole for a perfect set every-time. Comes with Hex Wrench. -
Quick View
1-1/4″ Ceiling Clip Assembly
The Ramset Ceiling Clip is designed to mount into a slanted ceiling, with hanging wire attached through the eye. Able to support light loads such as suspended ceiling grids.
-
Read MoreQuick View
Anchor Setting Tool Powder Load, 25 Caliber Disc
Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These .25 caliber powder loads provide the force needed to drive those fasteners into place. This level is the medium strength available, for average fasteners and materials.
Each disc has 10 powder loads, and there are 10 discs per box.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. -
Quick View
Ramset T3SS Gas Tool
The most versatile gas tool in the industry. Users can change out the nose piece to accommodate a variety of fasteners and assemblies. The T3SS provides the benefits of shooting a gas tool with reduced installation time and operator fatigue.
