Buildex Trugrip Roof Screw, 1″
Buildex® TrueGrip timber screws are suitable for fixing metal roofing into both hardwood and softwood timber battens. Their sharp point prevents screw-walking when starting to insert them. They also engage the material faster, and need less effort, for a safer installation environment.
- Description
- FEATURES AND BENEFITS
- STRENGTH CHART
Buildex® TrueGrip timber screws are suitable for fixing metal roofing into both hardwood and softwood timber battens. Their sharp point prevents screw-walking when starting to insert them. They also engage the material faster, and need less effort, for a safer installation environment.
- Fast and Easy application into both Hardwood and Softwood battens
- Climaseal® 4 corrosion protection available
- Under-roof Corrosion Protection with Shankguard® feature* which prevents the scratching and scouring of the fastener shank that can happen during installation.
- Higrip® Feature grips to the roof sheeting to create a positive join preventing water entry and over drilling. It also stops the roof sheet moving down the shank when the roof is walked on.
Strength Chart and Pull-Out Chart
Installation Guidelines
Related Products
-
Read MoreQuick ViewWood Screws
Wood screws are made to join two pieces of wood together and securely hold them. There are many styles of wood screws available today, from various driver tools to what material the wood screw is made from.
-
Read MoreQuick ViewSet Screws, Cup Point
Set Screws are essentially a headless bolt, which has a hex socket in the driving end. They are commonly used when a protruding head would be in the way of other moving parts. Their most common function is to secure two parts together, but without a pre-determined positioning point between them. A prime example is fixing a pulley wheel along a drive shaft, where the set screw in the wheel’s hub is tightened into the side of the drive shaft and holds them tight due strictly to friction.
Set screws are available either as a black hard steel alloy, or as stainless steel.
Because of its headless shape, and how it bores through its hole, a set screw is also known as a “grub screw”.
-
Read MoreQuick ViewLock Washers
-
Read MoreQuick ViewMro Thread-Locker, 50ml Bottle
MRO Solutions thread-locking products are anaerobic compounds formulated for sealing, joining, fastening, retaining, and generally locking together metal components. Unlike other thread-lockers, MRO compounds are non-surface sensitive, so they do not require use of primers for curing.
Once parts are mated with MRO thread-lockers, they form a unitized assembly that resists vibration. In addition, the mated parts are sealed against attack from corrosion, internal rust, seizure, solvents, gases, and other chemicals. -
Read MoreQuick ViewHex Cap Screws, Grades 8
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-8.
-
Quick ViewPAM #8 X 2-1/2″ Roof Tile Screws
Stainless steel tile roofing screws for use with the PAM auto-feed screw system. These screws are #8 x 2-1/2″ and used for attaching roof tile to wood. The type 17 point improves penetration of tile.
Meets Miami-Dade County, FL Protocol PA 114-95, Appendix E, Section 2 (ASTM G85). Box of 1,000 screws. -
Read MoreQuick ViewHex Nuts
Hex nuts in all their forms are widely used in construction and manufacturing. There are many different styles of hex nuts, including finished hex nuts, acorn nuts, lock nuts, and heavy hex nuts. They are available in many different grades of metal, with different finishes, and with coarse or fine threads. Choose from the options below to find the right hex nut for your project.
Note: The Coupling Nut – Reducing items use the Inch – Special option because they have two sizes of threads.
-
Quick ViewAluminum Key Hole Washer
Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.
-
Read MoreQuick ViewF436 Structural Washers (SAE)
-
Read MoreQuick ViewF-Track Bolts
The square head of these F-Track Bolts fits perfectly into all flat and angled storm panel F-Track.
