Extension Bit, 12″
The TruCut 12″ extension bit allows you to make cuts in deep recesses and corners.
- Description
Description
The TruCut 12" extension bit allows you to make cuts in deep recesses and corners.
Related Products
-
Quick ViewShip Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Read MoreQuick View
Masonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips. -
Quick View
HSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Quick View
Bit Holder
-
Read MoreQuick View
Euroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Quick ViewHSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
-
Quick View
Heavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
-
HotQuick View
ThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Quick View
21 Piece Impactech Driver Bit Set
The Impactech driver bit set contains 21 bits made from S2 modified shock resistant steel for professional performance and durability. These bit’s patented spiral torsion zone absorbs impact and extends bit life. The proprietary precision CNC machined tips provide an excellent fit in fastener recess. Impactech bit have been tested to outperform all leading brands in lifecycle and tip failure testing.
-
Read MoreQuick View
Countersink Bits Set, 4 or 9 Pc
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
Available in a 9 piece or 4 piece set. -
Quick View
Ship Auger Drill Bits
Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.
-
Read MoreQuick View
Masonry Bits, Carbide Tip
TruCut Masonry Bits
High quality masonry drill bits with heavy duty carbide tips. These masonry bits will drill through any rock or concrete that needs a hole in it.
The Premium quality bits have a hex-shaped shaft to eliminate spinning in the drill chuck. They also achieve a longer life at higher speeds due to “Super H” grade carbide tips. -
Quick View
HSS 8 PC Imperial – Annular Cutter Set
This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm -
Quick View
Bit Holder
-
Read MoreQuick View
Euroboor IBC Pilot Pins
Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.
-
Quick View
HSS Black Oxide Drill Bits
The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]
-
Quick View
Heavy Duty Cobalt Drill Bits
Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.
-
HotQuick View
ThunderTwist SDS Drill Bits
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions. -
Quick View
21 Piece Impactech Driver Bit Set
The Impactech driver bit set contains 21 bits made from S2 modified shock resistant steel for professional performance and durability. These bit’s patented spiral torsion zone absorbs impact and extends bit life. The proprietary precision CNC machined tips provide an excellent fit in fastener recess. Impactech bit have been tested to outperform all leading brands in lifecycle and tip failure testing.
-
Read MoreQuick View
Countersink Bits Set, 4 or 9 Pc
Countersinking screws is a often used method for ensuring a flush surface, without bumps of screwheads getting in the way. These cross-hole countersinks are specially designed so that the trailing edge of the hole makes the cut, and they excel at ejecting chips as they drill. Made of strong steel, they ensure years of precision work.
Available in a 9 piece or 4 piece set.
The ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.
