Prolock 10-3 Gauge Extension Cords
Each of our Pro Lock™ Extension Cords are molded with our unique and patented Pro Lock™ female connector. When a standard extension cord with a 15A-125V, 3 conductor male plug is inserted into our Pro Lock™ connector, it won’t pull apart. This prevents accidental disconnects that result in an inconvenient loss of power. Simply pull down on the connector collar to disconnect extension cords.
- Additional information
- Description
- Features
Additional information
| Size | 100′, 10/3 Guage, 50′, 10/3 Guage |
|---|
Each of our Pro Lock™ Extension Cords are molded with our unique and patented Pro Lock™ female connector. When a standard extension cord with a 15A-125V, 3 conductor male plug is inserted into our Pro Lock™ connector, it won't pull apart. This prevents accidental disconnects that result in an inconvenient loss of power. Simply pull down on the connector collar to disconnect extension cords.
• Manufactured to 10/3 AWG (American Wire Gauge) specifications.
• Each of the three conductors contain 104 strands of 30 AWG 100% copper wire.
• Molded on Pro Lock™ connectors will not pull away from the cord body and offer extra water resistance.
• Automatic locking feature: Insert male end into our Pro Lock™ connector, push together to lock & pull the collar down to unlock.
• We use high impact polycarbonate on both housing & collar on our Pro Lock™ connectors to guarantee hard service, extra-heavy duty use.
• Pro Lock™ Pull Strength: 80 Lbs. horizontally or vertically.
• Lighted Amber Power Check plug and indicates there is power running through the cord.
• Pro Lock™ green lighted CGM connector identifies ground continuity in the circuit.
• Our -58°F (-50°C) special cold-weather PVC jacket guarantees working flexibility in temperatures well below freezing.
• Presented in vibrant colors: Orange, Blue, Green.
• UL Listed and cUL Approved for Canada.
Related Products
-
Quick ViewMakita 55″ Guide Rail for Use with Plunge Saw
The Makita 55″ Plunge Saw Guide Rail (194368-5), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).
-
Quick ViewMakita XRM11 Bluetooth Jobsite Speaker, 18V XLT
Users can surround themselves with music, on or off the job site, with the new Makita® 18V LXT® / 12V max CXT® Cordless Bluetooth Job Site Speaker. Two speakers can be connected to listen in true stereo sound or connect up to ten speakers wirelessly to hear music throughout the job site. The speaker delivers rich full sound from one 4″ woofer with a passive radiator and one 1.4″ tweeter.
Compatible with a 12V max CXT and 18V LXT Lithium-Ion Batteries, this radio provides more flexibility for users. An included AC Adapter offers corded operation. -
Quick ViewMakita Subcompact Radio /Impact /Driver Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX301RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill that weighs only 2.8 lbs., and a variable speed brushless impact driver that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes an 18V LXT® Job Site Radio with Bluetooth® and MP3 compatibility. The kit includes two 18V LXT® Compact 2.0Ah batteries, which feature an integrated L.E.D. battery charge level indicator.
-
Quick ViewMakita Brushless Robotic Vacuum, 18V X2 LXT
The 18V X2 LXT® Brushless Robotic Vacuum is a cordless solution that automatically cleans large flooring spaces in commercial environments. The DRC200Z features an efficient brushless motor engineered for extended run time and longer tool life. Just turn it loose with two fully-charged 18V LXT® Lithium-Ion 5.0Ah batteries (sold separately) and it will clean approximately 5,380 sq.ft. of hard flooring (or up to 200 minutes of continuous operation in “Main Brush plus Vacuum” mode).
-
Quick ViewMakita DML810 Wobble Light, AC & 18V LXT
The 18V X2 LXT® Cordless/Corded Upright L.E.D. Area Light (DML810) is a self-righting light that stays in an upright position. The flood light features a self-balancing design that keeps the light in an upright position, even when knocked over, and delivers 5,500 / 3,000 / 1,500 lumens on High / Medium / Low.
L.E.D. lights effectively illuminate work area without the high heat of halogens and incandescent lights. This light illuminates 360 degrees for full illumination of the space, or 180 degrees to the left or right. -
Quick ViewMakita Portable Wet / Dry Vac, 18V LXT
The 18V LXT® Brushless 2 Gallon HEPA Filter Portable Wet/Dry Dust Extractor/Vacuum, Tool Only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99.97% of particulates .3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with an shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water lift of suction with just one 5.0Ah battery (sold separately).
-
Quick ViewMakita 13″ Jobsite Fan 3 Speed, 18V LXT
The Makita® 18V LXT® Lithium-Ion Cordless Fan (model DCF203Z) is a powerful and portable solution for painters, contractors, and more.
The DCF203Z has three settings for optimal air velocity control. It can be powered by Makita® 18V LXT Lithium-Ion Batteries or an AC adapter. The fan automatically oscillates 45° right and left and manually tilts 90° up and 45° down for convenience redirection of air flow. The fan body is 13″, and the fan blade span is 9-1/4″. -
Quick ViewMakita L.E.D. Adjustable Beam Flashlight, 18V LXT
The 18V LXT® Lithium-Ion L.E.D. Flashlight (model DML808) provides bright illumination, versatility, and convenience. The high-luminance single L.E.D. flashlight provides a full 200 lumens of light and a sharp, round spotlight. Features include a beam adjustment from spot to flood, and a 12-position pivoting head with positive stops from 60° to 110°. When used with a fast-charging 18V LXT® Lithium-Ion 5.0Ah battery, the flashlight delivers up to 23 hours of continuous illumination on a single charge. The Flashlight can be powered by Makita 18V LXT and 18V LXT Compact Lithium-Ion batter.
-
Quick ViewMakita Xenon Adjustable Beam Flashlight, 18V LXT
The Makita 18V LXT® Lithium-Ion Xenon Flashlight provides high illumination without the cord. It features a compact and ergonomic design for ease of use and a head which can be set in 4 positions for versatile use. This flashlight has a high illumination Xenon bulb that emits 4,500 Lux, with up to 4 hours of illumination on a single charge of an 18V LXT® Lithium-Ion 3.0Ah battery.
-
Quick ViewMakita Bluetooth Jobsite Radio, 18V LXT
The 18V LXT® Lithium-Ion Bluetooth® Job Site Radio (model XRM06B) delivers rich sound and increased compatibility in a more compact size. It is a perfect addition to the workshop or job site.
The XRM06B delivers great sound in a compact size, and is equipped with Bluetooth® to wirelessly connect your mobile device to play music. It has one auxiliary port for MP3 compatibility, and delivers rich stereo sound from two powerful 3″ side-firing speakers.
