Wood Screws
Wood screws are made to join two pieces of wood together and securely hold them. There are many styles of wood screws available today, from various driver tools to what material the wood screw is made from.
- Additional information
- Description
Additional information
| Driver | Phillips, Slotted, Square, Quadrex |
|---|---|
| Head Shape | Pancake, Flat, Round |
| Diameter | #4, #6, #7, #8, #9, #10, #12, #14, #16 |
| Length | 1/2″, 5/8″, 3/4″, 1″, 1-1/8″, 1-1/4″, 1-1/2″, 1-5/8″, 1-3/4″, 2″, 2-1/4″, 2-1/2″, 3″, 3-1/2″, 4″ |
| Material/Finish | Aluminum, Brass, Coated, Nickel, Nylan, Plain, Stainless Steel, Stainless 305, Zinc |
| Tip | Type 17, Tek, Pointed |
Wood screws are made to join two pieces of wood together and securely hold them. There are many styles of wood screws available today, from various driver tools to what material the wood screw is made from.
Related Products
-
Read MoreQuick ViewHex Cap Screws, Grades 2
A hex cap screw is a six-sided bolt with a trimmed hex head and a washer face on the bearing surface. Informally, it is also called a Finished Hex Bolt. Hex cap screws have tighter tolerances than standard bolts of the same size, and so are often used where precise tolerances are needed. The standard hex screw specifications include ASTM A449 and SAE J429 Grade-2.
-
Quick View
Aluminum Key Hole Washer
Aluminum key-hole washers are commonly used with combo truss machine screws and sidewalk bolts. They are used as an additional backing plate when storm panels keyways do not line up correctly. They are also often used to provide additional backing when sidewalk bolts have been changed out to truss head screws. They can be placed on after panels are installed.
-
Quick View
PAM #8 X 2-1/2″ Roof Tile Screws
Stainless steel tile roofing screws for use with the PAM auto-feed screw system. These screws are #8 x 2-1/2″ and used for attaching roof tile to wood. The type 17 point improves penetration of tile.
Meets Miami-Dade County, FL Protocol PA 114-95, Appendix E, Section 2 (ASTM G85). Box of 1,000 screws. -
Read MoreQuick View
Square Nuts, Zinc
As the name implies, square nuts have a 4-sided, square design. This square profile provides a greater bearing surface when installing onto a bolt. Square nuts are designed for use with square headed bolts, and the large surface provides better resistance to loosening. When using square nuts, as with hex nuts, use flat washers of the correct size and material.
-
Read MoreQuick View
Square Plate Washer
Square plate washers are made from low carbon steel and have a larger surface area than round washers. Since they develop more friction when tightened against wood, they are often found in timber construction.
Often, square plate washers are used to attach treated lumber sill plates to concrete foundations. Another common use is using square plate washers to attach wood beams to the walls of a garage, and them mount the garage door rails and equipment. -
Read MoreQuick View
Dekfast Roof Screws, 10″ to 18″
Dekfast XHD High Strength Fasteners are ideal for insulation attachment to wood and light gauge steel. The SD#1 point cuts through gravel, BUR and metal up to 18ga. Black Sentri SP long=life coating provides extended corrosion protection. The #3PH pan head is compatible with all Dekfast insulation stress and membrane seam plates.
Longer sizes are available by special request.
FM and Dade County Approved. -
Read MoreQuick View
T-Nuts
T-nuts are barrel shaped fasteners with internal threading, and are used to provide an anchor point for a bolt in a piece of wood, whether a flat board or a dimensional piece. They are especially useful when a flush surface is wanted. T-nuts have a flat base with prongs bent up at 90° angles, parallel to the barrel. After pre-drilling a hole, the t-nut can be fixed in place either by tightening a bolt into it from the top, which pulls the prongs into the wood, or using hammer to pound the locking prongs into the wood until flush.
-
Read MoreQuick View
Plow Bolts
Plow bolts feature a countersunk, flat head, square neck, and unified thread pitch. They are commonly used in road graders, scoop shovels, and other heavy-duty industrial equipment where a flat, smooth surface is required. Grade-5 plow bolts are made from a medium-grade, heat-treated carbon steel, and have a plain finish.
-
Read MoreQuick View
All Thread, Threaded Rod
Threaded rod has continuous threading, either on both ends or it may extend along the complete length of the rod. It has no head or fashioned tip. Threaded rod can be used as an anchor bolt, clamp, hanger or U-bolt.
Threaded rod is available in carbon steel, as Plain, Zinc Plated and HDG, as well as Stainless Steel and the B7/A193 alloy. -
Read MoreQuick View
Carriage Bolts
Carriage bolts have a smooth rounded head with a square neck underneath that locks into wood to prevent spinning when tightened. Use with a pre-drilled hole and secure with a hex nut and washer. They are great fasteners for decks, play equipment, docks, fencing, and furniture.
The unique design is great for connections where the head is not accessible for tightening. The self-locking square neck and coarse threads fasten very securely.
All carriage bolts we stock have coarse threading as a standard.
