Red Head Tapcon Masonry Anchors


Red Head Tapcon Masonry Anchors

The “original masonry” anchor that cuts its own threads into concrete, brick, or block.

SKU: Tapcon Category: Tags: , ,
  • Description
  • Additional information
  • Technical Specs
  • Installation Procedures
  • Selection Charts
  • Approvals


The “original masonry” anchor that cuts its own threads into concrete, brick, or block.

Maximum performance is achieved because the Tapcon Anchor, the Condrive® Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive® tool and the correct drill bit to assure consistent anchor performance.

ATF_LogoWorks in all masonry base materials.

  • Fast and easy— 3 anchors per minute.
  • No hole spotting or inserts required.
  • Removable.
  • Slotted hex and philips flat head styles.
  • Extended corrosion protection — Blue Climaseal™.
  • Available in 410 Stainless Steel.

Additional information

Head Style

Flat Philips, Hex Slotted

Material & Finish

Galvanized Steel, Stainless Steel 410, Stainless Steel 304


3/16″, 1/4″


1-1/4″, 1-3/4″, 2-1/4″, 2-3/4″, 3-1/4″, 3-3/4″, 4″, 5″, 6″

TAPCON-Performance-Edge-Spacing TAPCON-Performance-Hollow-Block TAPCON-Performance-Conctrete

  • Blue Climaseal™ provides extended corrosion protection.
  • Available in 410 Stainless Steel (see photo on left.)
  • Hex Head style on Tapcon Anchors is available for majority of fixture anchoring needs.
  • Phillips Flat Head style is available when flush seating is necessary in countersink applications.
  • Advanced Threadform cuts into concrete and masonry for reduced installation torque and increased pullout performance.
  • Lengths of Tapcon Anchors range from 1-1/4" to 4" in 3/16" and up to 6" in 1/4" diameters.
  • Nail-Type Point guides the anchor into the pre-drilled hole. Excellent for wood to concrete applications.
Read installation instructions before using!
  1. Select proper fastener – diameter/head style/length.
    1. Use selection chart to choose proper length.
  2. Drill Hole – use selection chart to determine drill bit length and depth of hole.
    1. Choose appropriate drill bit based upon diameter of Tapcon Anchor.
    2. Drill hole minimum ¼” deeper than Tapcon Anchor to be embedded.
      • Minimum anchor embedment: 1”
      • Maximum anchor embedment: 1-3/4”
  3. Drive Anchor.
  • If there are any questions concerning proper installation, applications or appropriate use of this product, please call our Technical Services Department at 1-800-899-7890. Failure to follow these instructions can result in serious personal injury.
  • Failure to wear safety glasses with side shields can result in serious personal injury. Always wear ANSI compliant eye protection (ANSI Z87.1-2003).
  • Using the wrong size drill bit will affect performance values and may cause failure.




  • Blue Climaseal™
    • ICC Evaluation Service, Inc. – #ESR-1671
    • ICC Evaluation Service, Inc. – #ESR-2202
    • Miami-Dade County – #11-0616.05
    • Florida Building Code FL#7556.1
  • 410 Stainless Steel
    • Miami-Dade County – #11-0616.05
    • Florida Building Code FL#7556.1