Metal Stakes for Safety Fence
Safety fencing post, 5′ long.
Control pedestrian and vehicle traffic around temporary hazards.
Use on construction sites, parking lots or warehouses.
Sturdy painted steel for in-ground use. Ground anchor plate for stability.
Metal tabs hold fencing in place.
Use with 4 ft. Standard and Heavy Duty Safety Fences
- Description
Safety fencing post, 5' long.
Control pedestrian and vehicle traffic around temporary hazards.
Use on construction sites, parking lots or warehouses.
Sturdy painted steel for in-ground use. Ground anchor plate for stability.
Metal tabs hold fencing in place.
Use with 4 ft. Standard and Heavy Duty Safety Fences
Related Products
-
Quick ViewMakita 3.0HP Big bore air compressor
Makita’s 3.0 HP Air Compressor is equipped with Makita’s Big Bore™ engineered pump cylinder and piston for higher output for two nailers, with less noise and improved jobsite performance. The MAC5200 delivers industrial power and results with improved durability and includes rugged wheels and folding handle for easy transport.
The MAC5200 is powered by a 3.0 HP motor with built-in thermal overload for additional protection. The Makita Big Bore™ engineered pump with cast iron cylinder has greater bore and stroke for increased compression, faster recovery and less noise. The cast iron construction is engineered for increased durability even under tough job site conditions. The MAC5200 has an oil lubricated pump and is equipped with a large automotive style filter for increased air intake and greater efficiency. -
Quick ViewMakita DML810 Wobble Light, AC & 18V LXT
The 18V X2 LXT® Cordless/Corded Upright L.E.D. Area Light (DML810) is a self-righting light that stays in an upright position. The flood light features a self-balancing design that keeps the light in an upright position, even when knocked over, and delivers 5,500 / 3,000 / 1,500 lumens on High / Medium / Low.
L.E.D. lights effectively illuminate work area without the high heat of halogens and incandescent lights. This light illuminates 360 degrees for full illumination of the space, or 180 degrees to the left or right. -
Quick ViewMakita 2.1 Gallon Hybrid HEPA Dust Extractor Vacuum, 18V X2 LXT
Clean-ups just got easier with the Makita 18V X2 LXT® Lithium-Ion (36V) Cordless/Corded 2.1 Gallon Dry Vacuum. The XCV04Z offers corded or cordless operation for maximum versatility and convenience.
In cordless operation, the XCV04Z is powered by two 18V LXT® batteries for 36V power and run-time, without leaving the 18V LXT® battery platform. Using two 18V 5.0Ah batteries (sold separately), the XCV04Z delivers up to 65 minutes of continuous run time on low setting and 30 minutes on high setting, with 74 CFM and 36” water lift of suction.
In corded operation, the vacuum delivers 127 CFM and 96” water lift. The 19.7′ power cord combined with the anti-static hoses (1-1/2″ x 8′ or 1” x 11-1/2′, both included) provide extended reach for fast clean-ups. -
Quick ViewMakita Compact Hand Vacuum, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless Vacuum (XLC02ZB) is a compact and powerful solution for fast and efficient cleaning. At only 18-3/4” in length this compact vacuum can be used as a “hand-vac”, or with the floor nozzle extension for floors, carpets, and hard-to-reach spaces. It has a redesigned floor nozzle for improved debris collection, and a bag-less 2-stage cloth filtration system for easy cleaning and quick debris disposal. When using an 18V LXT® 5.0Ah battery, users will get up to 33 minutes of continuous use on a single charge. It is compatible with Makita 18V LXT® and 18V LXT® Compact Lithium-Ion batteries.
-
Quick ViewMakita DML811 Work Light, AC & 18V LXT
The 18V LXT® Lithium-Ion Cordless/Corded Work Light (DML811) offers the convenience of cordless or corded operation, and provides bright and even illumination for work spaces. At full brightness it provides 3,000 lumens of light, and 750 lumens on low mode. Adjusting knobs enable the user to direct the light to the desired angle. The Work Light can be mounted on an optional tripod stand (sold separately). Dust and water-resistant construction (IP65 rated) for improved operation in harsh job site conditions.
The fast-charging 18V LXT Lithium-Ion 5.0Ah Battery (sold separately) delivers 11 hours of continuous illumination on the low setting. -
Quick ViewMakita Portable Wet / Dry Vac, 18V LXT
The 18V LXT® Brushless 2 Gallon HEPA Filter Portable Wet/Dry Dust Extractor/Vacuum, Tool Only (XCV11Z) is a powerful, portable solution in dust management applications. The XCV11Z captures 99.97% of particulates .3 microns and larger with the efficient HEPA filter. It’s compact and cordless design with an shoulder strap (sold separately) allows easy transport of the vacuum throughout the space for efficient use. Get up to 60 minutes of continuous run-time and up to 57 CFM and 27” water lift of suction with just one 5.0Ah battery (sold separately).
-
Quick ViewMakita DML809 Adjustable Beam Work Light, 18V LXT
The Makita® Portable Tripod Light Stand (GM00002073) is a durable and convenient elevated stand for up to two Cordless/Corded Work Lights (DML809 and DML811, sold separately). The Tripod Stand has a durable metal construction for longer life and sturdy three-legged design for maximum stability. The Tripod Stand telescopes up to 76” and allows for easy 360° rotation of the light. It collapses for optimal portability when the job is through.
-
Quick ViewMakita Adjustable Miter Saw Stand with Extensions
The Large Rising Base Miter Saw Stand (WST01N) is a versatile and durable accessory for a range of pro trades, wherever the job takes them. The WST01N has five height configurations and offers material support extensions that extend up to 9 ft. to support long crown molding, and folds in seconds for easy portability. In addition, the 12-1/8” wide aluminum feed roller and adjustable material stop are engineered for increased speed on repetitive cuts. Convenience features include a spring loaded mechanism for quick and easy set-ups, solid rubber wheels for easy job site portability, and compatibility (it will fit all Makita miter saws, sold separately).
The new stand is the perfect companion to a Makita miter saw for a broad range of cutting applications including crown molding, baseboard, case and base, and long wood materials. -
Quick ViewMakita Oscillating Multi-Tool, 18V LXT
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool (XMT03Z) delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
The XMT03Z has a small diameter barrel grip for improved handling, a large on/off slide switch with lock-on button, and adapters to fit most competitive accessories from Dremel®, Fein, Craftsman, Ridgid, or Ryobi.
The XMT03Z is engineered for a range of applications including cutting, sanding, scraping, grout removal, and more. It is ideal for remodelers, carpenters, plumbers, wood floor installers, and general contractors seeking a best-in-class cordless multi-tool.
-
Quick ViewMakita Brushless Robotic Vacuum, 18V X2 LXT
The 18V X2 LXT® Brushless Robotic Vacuum is a cordless solution that automatically cleans large flooring spaces in commercial environments. The DRC200Z features an efficient brushless motor engineered for extended run time and longer tool life. Just turn it loose with two fully-charged 18V LXT® Lithium-Ion 5.0Ah batteries (sold separately) and it will clean approximately 5,380 sq.ft. of hard flooring (or up to 200 minutes of continuous operation in “Main Brush plus Vacuum” mode).
