Makita Dust Extraction Cutting Guard for Grinder
The Makita Dust Extraction Cutting Guard is designed to work with the Makita 4-1/2″ and 5″ grinders, both corded and cordless. It forms a perfect barrier around the tool to capture as must residue as possible when in use.
- Description
- Features
The Makita Dust Extraction Cutting Guard is designed to work with the Makita 4-1/2" and 5" grinders, both corded and cordless. It forms a perfect barrier around the tool to capture as must residue as possible when in use.
APPLICATIONS : Designed for dust extraction during cutting applications
DURABILITY : Durable construction for longer life
CAPACITY : Easily adjustable depth setting; up to 7/8" cutting depth when used with a 5" cutting blade
COMPATIBILITY : For use with select Makita 4-1/2" and 5" Angle Grinders
INCLUDES : 4-1/2" - 5" Dust Extracting Cutting Guard
- Easily adjustable depth setting; up to 7/8" cutting depth when used with a 5" cutting blade
- Designed for dust extraction during cutting applications
- Durable construction for longer life
- Installs quickly and easily
- For use with select Makita 4-1/2" and 5" Angle Grinders
Related Products
-
Makita 2.6 Gallon Pressurized Water Tank
The Makita 2.6 Gallon Pressuriezed Water Tank is designed to be used with gas power saws, while making cuts in masonry materials with a wet-use diamond blade. Each tank is made of durable, lightweight poly-carbonate for added durability and a long life. The large 2.6 gallon capacity means less frequent refills and reduced downtime.
-
Makita Subcompact 3‑Pc. Combo Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX300RB is a combo kit with three 18V sub-compact solutions for drilling, driving, fastening and cutting.
The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit also includes brushless recipro saw with 0-3,000 strokes per minute, yet weighs only 6.2 lbs. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita Sub‑Compact 2‑Pc Combo Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V performance, and compatibility with the world’s largest 18V cordless tool system. The CX200RB is a combo kit with two 18V sub-compact solutions for drilling, driving and fastening.
The kit includes an ultra-compact 2-speed brushless driver-drill with two speed settings that weighs only 2.8 lbs., and a variable speed brushless impact driver with two speed settings that weighs only 2.6 lbs. For more efficient fastening, the impact driver features Assist Mode (A-mode) which helps eliminate “screw cam-out” and “cross threading” by driving at low speed until tightening begins. The kit includes two 18V LXT® Compact 2.0Ah batteries, and each reach a full charge in only 25 minutes on the efficient Rapid Optimum Charger – the fastest charge-time in the category – for less downtime and increased productivity. For added convenience, the batteries feature an integrated L.E.D. battery charge level indicator.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita 1/2″ Angle Drill w/Cord
Tackle hard-to-reach plumbing work with the Makita 1/2 in. Right Angle Drill (model DA4031). The drill can handle steel up to 1/2 in. thick and wood up to 4-5/8 in. at difficult angles with its Sidewinder handle that rotates 90 degrees left or right. The powerful 10 Amp motor offers precise variable speed control across 2 ranges, 0 – 1,200 RPM and 0 – 300 RPM. Additional features include an adjustable top handle and an ergonomic rubberized grip.
-
Makita 3/8″ Angle Drill w/Cord Paddle Switch
With a 10-5/8 in. long body and 2-5/8 in. head width, the Makita 3/8 in. Angle Drill (model DA3010F) provides a compact solution when working between framing studs and other close quarter applications. The paddle switch with variable speed provides increased user convenience, and the torque-limiting clutch is engineered to disengage the gears if the bit binds. The LED light illuminates the work surface for improved visibility.
-
Makita 14″ Chain Saw Kit, LXT 18V X2 (36V)
Landscapers and contractors are demanding more cordless alternatives to corded and gas-powered outdoor power equipment. Makita is meeting demand with an expanding line of cordless OPE, including the 18V X2 LXT® (36V) Brushless Chain Saw Kit (model XCU03PT). With zero emissions, lower noise, and considerably less maintenance, the XCU03PT is a welcome solution for cutting and trimming applications. It’s powered by two 18V LXT® batteries for 36V power and run time, but without leaving the strongly-preferred 18V battery platform. And with the efficient Makita outer rotor brushless motor with direct drive system, users get high power efficiency that is equivalent to a gas chain saw.
The XCU03PT has a 14” guide bar and the Makita-built motor with variable speed delivers 0-3,940 FPM for increased cutting speed, but with less noise (only 100dB(A)). It has zero emissions and reduced maintenance: there’s no engine oil to change, no spark plug to replace, and no air filter or muffler to clean. And there’s no need to drain the fuel for storage. Simply pick it up, load two 18V LXT® Lithium-Ion batteries, and the saw is ready to use. Convenience features include a “tool-less” chain adjustments, a front hand guard engineered to actuate chain brake when engaged, an electric brake for maximum productivity, and more.
It’s part of Makita’s expanding 18V Lithium-Ion system, the world’s largest cordless tool system powered by 18V Lithium-Ion slide-style batteries. Makita 18V Lithium-Ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita Subcompact 11/16″ SDS‑PLUS Rotary Hammer Kit, 18V LXT
Makita created a new class in cordless with 18V LXT® Sub-Compact tools. Makita Sub-Compact gives users 12V handling with 18V run time and compatibility with the world’s largest 18V cordless tool system. The 18V LXT® Sub-Compact Brushless 11/16” Rotary Hammer (accepts SDS-PLUS bits) is ideal for working in tight spaces and for overhead conditions.
The XRH06RB has an efficient Makita BL™ Brushless Motor for up to 50% longer run time, increased power and speed, and longer tool life. It has 2-mode operation for “rotation only” or “hammering with rotation”, with 0-680 RPM, 0-4,800 BPM and .88 ft.lbs./1.2 Joules of impact energy for fast and efficient drilling. The compact size and lower weight mean reduced fatigue for operators, especially for overhead applications. Additional features include a vibration-absorbing handle that moves independently of the motor and hammer mechanism for increased operator comfort, as well as a variable speed trigger, built-in L.E.D. lights, and one-touch sliding chuck for easy bit changes.
It’s part of Makita’s expanding 18V LXT® system, the world’s largest cordless tool system powered by 18V Lithium-Ion batteries. Makita 18V LXT® batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger.
For improved tool performance and extended battery life, Makita created Star Protection Computer Controls™. Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT® and Compact Lithium-Ion batteries with the star symbol on the battery indicating Star Protection inside.
-
Makita 7-1/4″ Magnesium Circular Saw
The Makita 5007MG 7-1/4 in. Magnesium Circular Saw features highly durable magnesium components and a powerful 15 AMP Makita-built industrial motor. The 5007MG seamlessly balances weight, power, durability, and ease of use, making it the most refined circular saw on the market. A built-in dust blower clears the line of cut for more accurate and precise cuts.
The 5007MG is built for framing walls, floors and roofs using a range of dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. Other applications include plunge and bevel cutting. -
Makita Couple Shaft Bristle Brush Attachment 23-5/8″
The Makita Bristle Brush Couple Shaft Attachment is the perfect accessory for Makita 18V X2 LXT (36V) and MM4 4-Stroke Engine Couple Shaft Power Heads (sold separately). The Bristle Brush Couple Shaft Attachment features a wide sweeping surface of 23-5/8” and durable nylon bristles for optimum performance. The steel drive shaft reduces vibration and increases equipment life.
-
Makita 3-1/2″ Stick Framing Nailer
The 21º Full Round Head 3-1/2″ Framing Nailer combines durable construction and robust performance with ease-of-use features for wood framing applications. The AN924 is engineered for a range of applications including framing walls, floors and roofs, as well as construction of roof and floor decking, floor and wall sheathing/siding, and sub-flooring. It is ideal for framers, roofers and carpenters.