Makita 5-7/8″ 32T Blade, GP Metal
The Makita 5-7/8″ Carbide-Tipped Metal Cutting Saw Blade is the ideal accessory for the Makita XSC02 or XSC04 18V LXT® Lithium-Ion 5-7/8″ Cordless Metal Cutting Saw. The Makita Metal Cutting Saw Blade has an ultra-thin kerf design that provides smoother cuts with less drag on the motor and minimal material loss. It is ideal for cutting pipe, angle iron, channel, and more.
- Description
- Features
The Makita 5-7/8" Carbide-Tipped Metal Cutting Saw Blade is the ideal accessory for the Makita XSC02 or XSC04 18V LXT® Lithium-Ion 5-7/8" Cordless Metal Cutting Saw. The Makita Metal Cutting Saw Blade has an ultra-thin kerf design that provides smoother cuts with less drag on the motor and minimal material loss. It is ideal for cutting pipe, angle iron, channel, and more.
EFFICIENCY : Ultra-thin kerf design for lighter cutting load and less wasted material
PERFORMANCE : Specially designed for cordless saws to permit more cuts per charge
PRECISION : Individually hand-hammered for flatness and expertly tensioned for true cuts
DESIGN : For use with Makita 5-7/8" Cordless Metal Cutting Saw
INCLUDES : 5-7/8" 32T Carbide-Tipped Saw Blade, Metal/General Purpose
- Ultra-thin kerf design provides smoother cuts with less drag on the motor and minimal material loss
- Modified triple chip grind for increased efficiency and life
- Fully hardened steel saw plates are individually hand-hammered for flatness and expertly tensioned for true cuts
- For cutting pipe, angle iron, channel, and more
- For use with Makita 5-7/8" XSC02 / XSC04 Cordless Metal Cutting Saws
Related Products
-
Read MoreQuick View
Makita Band Saw Blades, 44-7/8″
Makita’s Portable Band Saw Blade features bi-metal construction that lasts longer than carbon blades for added user convenience and value. They make clean, quick cuts in a wide variety of applications including cutting all thread, rebar, pipe and channel. For use cutting a wide variety of materials including mild steel, aluminum and stainless steel.
-
Makita XGT 40V Rear Handle 7-¼” Circular Saw Kit
The Makita 40V max XGT® Rear Handle 7-1/4” Circular Saw Kit (GSR01M1) provides cordless convenience, while taking on high-demand applications. The Makita-built brushless motor delivers 6,400 RPM for high-speed cutting performance. It cuts 3X the material in a single pass with a large cutting capacity of 2-9/16”. This saw is ideal for framers, builders, roofers, forming, and more.
The GSR01M1 offers 56-degrees bevel capacity with positive stops at 22.5-degrees and 45-degrees and a bevel up to 56-degrees. The saw features an electric brake for maximum productivity and a die-cast magnesium base. Automatic Torque Drive Technology adjusts cutting speed under load for optimum cutting performance.
XGT is a system of equipment, tools, batteries, and chargers utilizing 40v max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
-
Read MoreQuick View
Arbors for Hole Saws, Mag-Bit
These arbors attach to various sizes of hole saws, and have shanks for hex and SDS drivers. They are made by Mag-Bit, but match industry standard hole saws. Each arbor can attach to multiple sizes of hole saw, with the smallest starting at 9/16″ and going up to 1-3/16″.
The larger size starts at 1-1/4″, and runs up to the largest at 6″. This size has two posts that fit into matching holes in the back plate of the saw body, so ensure that the saw can’t spin around the arbor as you cut the hole.
In addition to that choice, an arbor may have a shank that is 1/4″, 3/8″, or 7/16″ hex, or SDS. -
Read MoreQuick View
Oshlun Multi-Tool Blades
-
Makita Drywall Cut out Saw Blade, 2 Pack
The Makita Cut-Out Saw Blade is the right accessory for straighter, more accurate cutting in installed drywall. When used with the Makita 18V LXT® Lithium-Ion Cordless Cut-Out Saw XDS01Z, the B-49703 blade is ideal for cut-outs and repair applications. The blades have depth markings for easier adjustments, and will cut drywall board up to 1-3/16” thick. For longer performance life, the blades are constructed with durable High Carbon Steel (HCS).
-
Makita 5-7/8″ 60T Blade, for Stainless Steel
The Makita 5-7/8″ 60T Carbide-Tipped Metal Cutting Saw Blade is the ideal accessory for the Makita XSC02 or XSC04 18V LXT® Lithium-Ion 5-7/8″ Cordless Metal Cutting Saws. The Makita Metal Cutting Saw Blade has an ultra-thin kerf design that provides smoother cuts with less drag on the motor and minimal material loss. It is ideal for cutting Stainless Steel.
-
Makita 32-7/8 X 1/2″ X 18 T Bandsaw Blades, 5 Pack
Makita compact portable band saw blades are manufactured using an improved welding process for longer life. The wavy tooth set is designed to cut through various materials including steel and stainless steel efficiently. The bi-metal construction means a longer life for the blade.
-
Makita Straight Metal Shear, 18V LXT
The Makita 18V LXT® Lithium-Ion Cordless 18 Gauge Straight Shear (model XSJ01) combines high speed, compact size and less weight. The XSJ01Z has a Makita-built 4-pole motor that delivers 2,800 strokes per minute (SPM) for faster cutting. The tough double-cut shear design handles up to 18 gauge mild steel and 20 gauge stainless steel for straight or scribe cuts without deforming the material. The swivel shear head rotates 360 degrees for increased cutting options. yet it weighs just 5.3 lbs. for better control in cutting steel and stainless steel sheet metal.
The XSJ01Z is a powerful yet compact metal shear built for any professional user seeking a best-in-class compact cordless metal shear for metalworking tasks. -
Read MoreQuick View
Bi-Metal Hole Saws
Bi-Metal hole saws are constructed using both High Speed Steel (HSS) for its strength, and spring steel for its flexibility. This allows fast cutting in a wide range of materials, with less breakage from tough jobs.
These hole saws also have a 4/6 variable pitch tooth combination to reduce vibration, and a deep cup for improved chip removal. -
Makita 7-1/4″ 24T Framing Saw, 10 Pack
The Makita 7-1/4″ Framing Blade has an efficient 24 tooth design. The blade is expertly tensioned for true cuts. Carbide tooth design for quality cuts and longer life.