Hex Head Cap Screws – Stainless
- Description
- Sizes
- Tech Specs
- Downloads
Description
Hex bolt length is measured from under the head to the end of the bolt.
Technical specifications and diagrams like shear and tensile straight ratings go here.
View Technical Specs: TS-Bolt Specs - Stainless
View Certification Info: ASTM
Related Products
-
Wej-It Ultra-Drop™ Drop-In Anchors
The Ultra-Drop Drop In Anchor that requires relatively shallow embedment. It also eliminates the requirement for rod couplings in overhead applications.
The setting tool is used to expand the Drop-In anchors after they are placed in the drilled hole.
-
Hot
Quick ViewHex Head Cap Screws – Grade 8
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 8 has a greater tensile strength than Grade 5. Designed for use in high-strength and high-stress applications. -
Read MoreQuick ViewPOWER-Skru Bolt Anchors
The POWER-Skru Bolt Anchor is a high-strength screw anchorwith self-taping threads that offer a unique undercutting design for anchoring into concrete and masonry. No secondary setting is needed. The POWER-Skru Bolt Anchor provides high-strength performance with low installation torque. A heavy-duty mechanically-galvanized finish is available to enhance corrosion resistance.
Can be used with almost any material, including:
- Racking
- Railing Sill
- Stadium Seating
- Tilt up Braces
- Formwork
- Anchoring Equipment
-
Quick ViewElite Clevis Hanger
A clevis hanger consists of one U-shaped clevis and a second V-shaped clevis with a hole in a flattened section at the base of the V, joined together with a bolt. Clevis hangers are used as a pipe attachment providing vertical adjustment for pipes
-
Read MoreQuick ViewMakita 3/4″ Hollow Sockets
The Makita Hollow Sockets are designed to accelerate overhead fastening work by reducing time-spent hand threading fasteners over threaded rod. The hollow shafts allow long bolts and threaded rod to pass through in fastening applications while the increased socket lengths provide better access to nuts located in high places in ceiling or ductwork. The 1/4” hex shank is press-fit for durability and drops readily into an impact driver or driver-drill for convenient, automated fastening.
-
Hot
Quick ViewAnkr-TITE® CCAT Cracked Concrete Wedge Anchors
The CCAT Cracked Concrete Wedge Anchors are engineered to provide superior performance in cracked concrete in both seismic and wind load conditions.
-
Hot
Quick ViewHex Head Cap Screws – Grade 5
Hex Head Cap Screws are designed for easy assembly into a tapped hole. Hex Cap Screws meet SAE specifications with a specially designed washer face under the head and a chamfered point. Grade 5 is the most common grade used in manufacturing assembly. Zinc plating, retards the corrosion rate in a normal atmosphere. Tensile Strength: 120,000 psi minimum.
-
Read MoreQuick ViewSidewalk Bolt, Stainless Steel
Also known as shutter screws, the ultra-wide truss head distributes the load over a large area for excellent holding pressure when placing plywood, metal, and fabric hurricane panels or removable track. Made of 18-8 stainless steel, these screws are chemical resistant and may be mildly magnetic.
-
Quick ViewPanelMate Quick Kit
This kit contains all of the hardware you need to get started making your home hurricane-resistant. There are 40 PanelMate anchors, along with the bit and driver to properly set them. There are also 40 washers and wing nuts to secure the storm panels to the anchors.
-
Quick ViewPOWER-DROP Drop-In Anchors
POWER-Drop anchors are internally threaded anchors that provide wedge anchor performance with the convenience of a drop-in anchor. The safety shoulder supports the clip when the anchor is under strain to eliminate bolt-end collapse and/or clip slippage under ultimate loading conditions. The POWER-Drop is seismic rated: allowable values may be increased 33.3% for short-term loading in resisting earthquake or wind loads. Numerous head style and size options are available: they may be used with machine screws, tamper-proof bolts, threaded rod and a variety of other male-threaded fastenersCan be used with almost any material, including:
- Normal Weight Concrete
- Lightweight Concrete
- Solid Masonry
