Rain Suit, 3 Piece
Made of .35mm PVC on polyester for those tough and rugged jobs. Resistant towards snags and punctures and is extremely durable. Storm flap front, covered pockets, attached hood and a bib style trouser. 3 piece suit available in yellow.
- Additional information
- Description
Additional information
| Size | Small, Medium, Large, Extra Large, XX Large, XXX Large |
|---|
Made of .35mm PVC on polyester for those tough and rugged jobs. Resistant towards snags and punctures and is extremely durable. Storm flap front, covered pockets, attached hood and a bib style trouser. 3 piece suit available in yellow.
Related Products
-
Quick ViewMakita Trimmer / Blower Combo Kit, 18V XLT
With zero emissions and lower noise, the 18V LXT® Brushless Cordless 2-Pc. Combo Kit is a welcome solution for clean-up applications. It’s powered by one 18V LXT 4.0Ah Battery, the same battery that powers the full range of solutions in the expanding LXT System.
The combo kit includes a blower (XBU03Z) and trimmer (XRU23Z). This blower delivers speeds up to 116 MPH air velocity and a full 459 CFM of air volume. It features a compact and ergonomic design, variable speed trigger, and cruise control lever provides management of power and run time. The string trimmer delivers up to 6,000 RPM and features a variable speed trigger and rapid-load bump-and-feed trimmer head which loads line in seconds with 3 easy steps.
The outdoor power equipment features Extreme Protection Technology (XPT™). XPT™ is a protective seal inside the tool and is engineered for improved operation in harsh conditions by channeling water and dust from key internal components.
-
Quick View
Makita String Trimmer Edger, 18V LXT
The 18V LXT® Lithium-Ion Cordless String Trimmer (XRU02Z) is a versatile solution for landscape cutting and trimming, but without gasoline or a cord. The XRU02Z delivers 7,800 RPM and up to 45 minutes of run time on a single charge of the 18V LXT® Lithium-Ion 3.0Ah battery.
-
Quick View
Makita 25.4cc MM4 4-Stroke Couple Shaft Power Head
The Makita 25.4 cc MM4® Couple Shaft String Trimmer (model EX2650LH) delivers power and ease-of-use for commercial duty applications. The Makita 4-stroke commercial duty engine requires no fuel mixing, and the multi-position lubrication system enables engine to be inclined to any angle for continuous operation. For added convenience, the trimmer is engineered with Mechanical Automatic Engine Decompression for quicker, easier starts. In addition, the commercial duty dual stage air filter with large sealing areas is replaceable and easily accessible, and the oil filling port and drain plug are easily accessible with oil level view window for easy checking and replacing of oil.
-
Quick View
Makita 20″ 56cc Farm / Ranch Chainsaw
The Makita 20” 56cc Chain Saw combines a high power-to-weight ratio with easier starts and lower vibration for a full range of applications. The 56cc engine delivers 4.0 HP and an engine speed of 13,800 RPM, with an Easy Start spring-assisted starter. Heavy-duty cartridge filter system increases durability while reducing frequency of maintenance. Additional features include an easy-to-clean chain compartment for efficient clearing of chips, even when rip cutting, and the advanced vibration dampening system is engineered to reduce vibration. The EA5600FRGG is engineered for a range of cutting and trimming applications, and is ideal for farm and ranch work environments.
-
Quick View
Makita 3-Speed String Trimmer, 18V LXT
Landscapers are demanding more cordless alternatives to gas-powered outdoor power equipment. Makita is meeting demand with an expanding line-up of cordless OPE, including the 18V LXT® Lithium-Ion Brushless String Trimmer. With zero emissions, lower noise, and considerably less maintenance, the 18V cordless string trimmer is a welcome solution for landscapers. It features an efficient Makita BL™ brushless motor for longer run time, increased power and speed, and longer tool life. The kit includes an efficient Rapid Optimum Charger and an 18V LXT® 4.0Ah battery which reaches a full charge in only 40 minutes – the fastest charge-time in the category – for less downtime and increased productivity.
-
Read MoreQuick View
Makita XGT 40V 24″ Rough Cut Hedge Trimmer Tool
With zero emissions and lower noise, the 40V max XGT® Brushless Cordless 24” Rough Cut Hedge Trimmer (GHU01) is a welcome solution for professional landscaping clean-up applications. The Makita-built brushless motor delivers up to 4,000 SPM for powerful trimming. It has three speed options to manage power and run time.
XGT is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 2 feature models of the GHU01 Hedge Trimmer. The choice is with or without one battery and rapid charger. Options for the Makita GHU01 are:- GHU01Z: Tool only
- GHU01M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, rapid charger
-
Read MoreQuick View
Makita XGT 40V 15″ String Trimmer
Makita XGT® Outdoor Power Equipment delivers gas-like performance demanded by professional landscapers. The 40V max XGT® Brushless 15” String Trimmer (GRU01) delivers the power needed to get the job done. With zero emissions, lower noise and maximum versatility, the power head provides a cordless solution for heavy trimming applications.
A variable speed trigger controls cutting speed with three speed options (3,500, 5,300, 6,500 RPM), allowing users to match power and speed to the changing demands of the application. Automatic Torque Drive Technology mode automatically shifts speed to extend run time or add power as needed, and the Rapid Load Bump and Feed Trimmer Head loads a new line in seconds with 3 easy steps.
XGT is a system of equipment, tools, batteries and chargers utilizing 40V max lithium-ion batteries. XGT is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.
There are 2 feature models of the GRU01 15” String Trimmer. The choice is with or without one battery and rapid charger. Options for the Makita GRU01 are:
- GRU01Z: Tool only
- GRU01M1: Tool, (1) 40V max XGT® Lithium-Ion 4.0Ah battery, and rapid charger
-
Quick View
Makita Bar Chain Oil
Makita, a leader in outdoor power equipment, offers a range of tools and accessories to keep your OPE running strong. For top cutting performance, Makita Bar Chain Oil reduces heat and friction for efficient cutting and longer bar and chain life. The replaceable screw-top and spout design makes pouring and storage a snap.
-
Read MoreQuick View
Hose Clamps, Stainless Steel
Hose clamps are used to secure the end of a hose to a connector, and prevent the liquid inside from leaking out. There are several styles for various applications. These worm-screw hose clamps are universal for most situations, and are used in many industries including automotive, agriculture, and marine.
-
Read MoreQuick View
Tek Self-Drilling Screws
Teks screws provide secure fastening to metal with strong holding power, without the need to pre-drill. High performance cutting tips are designed to quickly penetrate the metal surface for easy installation. Self-tapping threads ensure strong holding power, in either sheet metal or steel beams. There are even Teks screws for wood-to-metal applicaitons.
Standard grade Teks screws are ideal for attaching HVAC, electrical work, metal framing, and general light to medium applications. The TRAXX grades are designed for heavier applications, and are available in Stainless Steel and Hardened Steel.
There are also several types that include neoprene washers, to seal the drill site against rain or other water.
Please answer the following questions to find the exact Teks screw that you need.
