Red Head Epoxy Nozzle, Standard and Specialty
There are currently five nozzles available for the Red Head epoxy tubes. And because all of the epoxy packages have the same threaded outflow connector, each nozzle works with each size of each epoxy product line.
A24S- Mixing Nozzle, fits holes for 3/8” to 5/8″ anchor
S55 – Standard Mixing Nozzle, fits holes for 3/8” anchor or larger
E55 – Long Mixing Nozzle, fits holes for 3/8” anchor or larger
S75 – High Flow Mixing Nozzle, fits holes for 3/4” anchor or larger
S75EXT – Extension for S75 High Flow Mixing Nozzle
- Additional information
- Description
Additional information
| Option | A24S Basic, S55 Standard, E55 Long, S75 High Flow, S75EXT Extension |
|---|
There are currently five nozzles available for the Red Head epoxy tubes. And because all of the epoxy packages have the same threaded outflow connector, each nozzle works with each size of each epoxy line.
A24S Basic Mixing Nozzle
Included with A7+ 10 oz package.
Fits 3/8” to 5/8” holes (overall length of nozzle 6-3/8”).
S55 Standard Mixing Nozzle
Fits holes for 3/8” diameter anchors and larger.
3-1/2” inch usable length for 3/8” and 1/2” anchors.
8-1/4” usable length for 5/8” anchors and above.
E55 Long Mixing Nozzle
Fits holes for 3/8” diameter anchors and larger.
5-3/4” inch usable length for 3/8” and 1/2” anchors.
12-5/8” usable length for 5/8” anchors and above.
S75 High Flow Mixing Nozzle
Fits holes for ¾” diameter anchors and larger.
7-3/8” usable length .
S75EXT Extension for High Flow Mixing Nozzle
For 3/4” diameter anchors and larger.
15-5/8” usable length when attached to S75.
Related Products
-
Read MoreQuick ViewThreaded Stud
Threaded studs are available in a variety of thread and shank lengths for use in concrete, some types of concrete block, and A36 or A572 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required or for suspending sprinkler systems.
The threaded studs have a specially designed point to allow proper penetration into the base material. A plastic flute is mounted over the point to retain the drive pin in the fasteners guide of the tool providing guidance during the driving operation. A plastic cap is also provided to protect the threads of the fastener during the driving process as well as providing guidance during installation. -
Read MoreQuick ViewGrey Plastic Anchor, No Lip
This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs. This type has no outer ring or lip that remains outside the pre-drilled hole, so there will not be any plastic visible once the screw is in place. Also, whatever is being attached to the wall will sit directly against the wall, with no gap.
-
Read MoreQuick View
Grey Plastic Anchor, w/Lip
This is a standard plastic expansion anchor that can be used in drywall or solid walls for light hanging or attaching needs.
-
Quick View
1/2″ Combo Bit for 1/4″ Lead M/S Anchor
This 1/2″ combo drill bit installs lead anchors for 1/4″-20 combo sidewalk bolts. I works for all masonry surfaces, both block and concrete. The smaller pilot bit starts the hole in the right location, and the larger 1/2″ step bit drills the perfect hole for setting lead machine screw anchors.
Fully adjustable collar allows you to set the depth of the hole for a perfect set every-time. Comes with Hex Wrench. -
HotQuick View
Original Wej-It® Wedge Anchors
The Wej-It original Wedge Anchors are time tested with proven reliabilty and has been an industry standard for over 60 years.
-
Read MoreQuick View
Plastic Anchor Kit
This kit contains standard drywall/concrete expansion anchors, screws, and a masonry drill bit sized appropriately.
Kits are available with standard Phillips pan head screws, or with slotted hex head washer screws.
Sizes are:
3/16″ Anchor & Bit, with #6 – #8 x 3/4″ Phillips Pan Head Screw
1/4″ Anchor & Bit, with #10 – #12 x 1″ Phillips Pan Head Screw
1/4″ Anchor & Bit, with #10 – #12 x 1″ Slot Hex Head Screw -
Read MoreQuick View
Toggle Bolt, Zinc Plated
The Toggle Bolt is a spring wing type hollow wall anchor designed for use in block, wallboard and other hollow base materials. The Toggle Bolt is a two-part assembly consisting of a machine screw and a spring wing toggle. Sizes range from 1/8″ x 2″ to 1/2″ x 6″ with combo round, flat, mushroom, tie-wire or slotted hex head styles.
-
Quick View
Hammer Drive Tool
Drive pin anchors are installed in pre-drilled holes. Using this tool and a hammer, a solid strike drives a nail into the anchor body, expanding the anchor to form a tight fit. These anchors secure light loads to masonry materials.
-
Quick View
1-1/4″ Ceiling Clip Assembly
The Ramset Ceiling Clip is designed to mount into a slanted ceiling, with hanging wire attached through the eye. Able to support light loads such as suspended ceiling grids.
-
Read MoreQuick View
Toggle Wing, Zinc Plated
A Toggle spring wing anchor, also called a toggle nut, in zinc plated steel is an anchor used in hollow wall applications (walls with space on the other side) such as drywall and concrete blocks (also called cinder blocks) or any hollow concrete masonry unit. Toggle wings are often used to replace spring wings used in the installations of toggle bolts. Toggle nuts are used with machine screws through pre-drilled holes.
