Ramset Cobra
The Ramset Cobra+ 0.27 Caliber Semi-Automatic Powder-Actuated Tool can tackle professional remodeling projects, such as attaching wood to concrete or steel. It lets you set the load strength to match the job. The adjustable power level increases speed and efficiency and reduces power up to two levels. The silencer feature reduces actuation noise, and the ergonomic grip provides comfort for long jobs.
- Description
- Features
- Training and Certification
The Ramset Cobra+ 0.27 Caliber Semi-Automatic Powder-Actuated Tool can tackle professional remodeling projects, such as attaching wood to concrete or steel. It lets you set the load strength to match the job. The adjustable power level increases speed and efficiency and reduces power up to two levels. The silencer feature reduces actuation noise, and the ergonomic grip provides comfort for long jobs.
- Use for attaching 2 x 4s, furring strips and electrical boxes to concrete and steel
- New silencer feature reduces jobsite noise
- Adjustable load strength for optimum penetration into base material
- Ergonomic grip and padded handle design enhance user comfort and absorb recoil
- Includes reusable storage case, safety glasses, spall guard, wire cleaning brushes, and common replacement parts (barrel retention clip and piston)
- Fires 10 shot strip loads, 1 strip of loads drives 10 pins (up to 3 in.)
ONLINE POWDER TRAINING AND CERTIFICATION
To protect the operator and assure safety on the jobsite, OSHA and ANSI require all powder actuated tool users to be trained
and certified for the tool that will be used. Ramset enables you to receive training thrrough our website training program.
This approach combines interactive web-based training techniques and online testing with feedback during the test.
The course consists of approximately 30 pages of usage, safety, and troubleshooting material. Upon completion of this
brief course, you will immediately take an online exam. With successful completion of the exam, you then print a Ramset
certification card.
At the end of the course, you are also given the ability to download individual tool manuals.
To take the course, and be certified to operate a Ramset powder actuated tool:
• Go to www.Ramset.com
• Find the heading called Get Your License
• Click P.A.T. Licensing
• Click Begin Operator Course (choose English / Spanish / French)
• When course is complete, take the test
• After passing the test, download and print your certificate
• Place the certificate in your wallet
Related Products
-
Read MoreQuick ViewRamset Conduit Clamp, Gas Actuated
The Ramset Conduit Clamp is used to attach conduit to concrete. Pin pre-assembled to an 18 gage conduit clamp, and is designed for use in the Ramset T3SS Single-Shot Gas Tool.
-
Quick ViewRamset Viper 4
DESIGNED FOR THE CHALLENGES OF OVERHEAD FASTENING
The industries most preferred overhead fastening tool. Its small compact design allows the contractor to reach up into very tight spaces.
-
Read MoreQuick ViewAnchor Setting Tool Powder Load Strips
Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These color coordinated .25 and .27 caliber powder loads provide the force needed to drive those fasteners into place. They provide from medium power up to the highest power of loads available.
Each strip has 10 powder loads, and there are 10 strips per box.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator’s manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. -
Read MoreQuick ViewThreaded Stud
Threaded studs are available in a variety of thread and shank lengths for use in concrete, some types of concrete block, and A36 or A572 structural steel. They are used for applications where it may be desirable to remove the fixture, where shimming may be required or for suspending sprinkler systems.
The threaded studs have a specially designed point to allow proper penetration into the base material. A plastic flute is mounted over the point to retain the drive pin in the fasteners guide of the tool providing guidance during the driving operation. A plastic cap is also provided to protect the threads of the fastener during the driving process as well as providing guidance during installation. -
Quick ViewMakita Keyless Chuck for 1/4″ Impact Driver
The Makita 3/8 in. Metal Impact Driver Keyless Chuck is a drill attachment that is made from metal. This chuck can convert an impact driver into a driver drill. It accepts round and hex shank bits.
-
Quick ViewRamset Tie Strap Holder
The Ramset Tie Strap Holder is used to install temporary lighting and secure low voltage cable to concrete. It can hold a standard cable tie up to 3/8″ in width. Fastener is pre-assembled to a 22 gage tie strap holder, and is designed for use in Ramset T3SS Single-Shot Gas Tool.
-
Read MoreQuick ViewAnchor Setting Tool Powder Load, 25 Caliber Disc
Powder actuated tools are the quickest, most efficient way to set fasteners into concrete slabs and block walls. These .25 caliber powder loads provide the force needed to drive those fasteners into place. This level is the medium strength available, for average fasteners and materials.
Each disc has 10 powder loads, and there are 10 discs per box.
Caution: Always test-fasten with the lowest power level for your tool. If more power is necessary, use the next highest power level until proper level and fastening is achieved. Refer to operator's manual for more specific details. Observe all safety reminders. Tool operators must be trained and qualified as required by federal law. Failure to use properly can result in serious injury or death to users or bystanders. -
Read MoreQuick ViewRamset Threaded Rod Hanger, Gas Actuated
The Ramset Threaded Rod Hanger is used for suspended ceilings, piping and other items using 1/4″ or 3/8″ threaded rod. A 3/4″ or 1″ length fastener is pre-assembled to a 16 gage threaded rod hanger, and is designed for use in Ramset T3SS Single-Shot Gas Tool.
-
Quick ViewRamset T3SS Gas Tool
The most versatile gas tool in the industry. Users can change out the nose piece to accommodate a variety of fasteners and assemblies. The T3SS provides the benefits of shooting a gas tool with reduced installation time and operator fatigue.
-
Quick ViewMakita XPH14Z 1/2″ Hammer Driver-Drill, 18V LXT
The 18V LXT® Brushless Cordless ½” Hammer Driver-Drill (XPH14Z) breaks new ground with a full 1,250 in.lbs. of Max Torque for the most demanding drilling and driving applications and 0-31,500 BPM for faster hammer drilling into masonry materials. The XPH14Z is positioned at the top of the LXT line-up of driver-drills.
The XPH14Z has a more compact and ergonomic design, 14% shorter than the previous model. It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. With a 2-speed transmission (0-550 & 0-2,100 RPM), the XPH14Z can tackle a wide range of drilling, fastening and hammer drilling applications. Other features include an all-metal ½” self-ratcheting chuck for improved bit-gripping strength, L.E.D. lights, and a rubberized soft grip for increased comfort.
