Grinder / Metal Working

  • MAKITA 9″ CUT OFF / ANGLE GRINDER , 18V X2 LXT

    Makita delivers corded grinding performance without the cord with the 18V X2 (36V) LXT® Lithium-Ion Brushless 9” Paddle Switch Cut-Off/Angle Grinder with Electric Brake and AWS™ (XAG23ZU1 tool only). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG23ZU1 is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.
    For improved efficiency, it’s equipped with Auto-Start Wireless System (AWS™) technology. AWS™ utilizes Bluetooth® technology for wireless communication between the tool and dust extractor (sold separately). When the trigger is engaged, the AWS™-equipped dust extractor powers-up. When the trigger is released, the dust extractor powers-down. AWS™ is intelligent communication that eliminates cords and excessive noise since the dust extractor runs only when the tool is running.

  • MAKITA 16 GAUGE NIBBLER, 18V LXT

    The 18V LXT® Lithium-Ion Cordless 16 Gauge Nibbler (XNJ01) provides contractors with another 18V LXT® metal cutting solution. The XNJ01Z is engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. It is ideal for metal roofing and decking contractors, HVAC, and metal fab shop work.
    The XNJ01Z is powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360° to meet the demands of the cutting direction, with a cutting radius of 1-3/4” (inner edge) and 2” (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.

  • MAKITA 4-1/2″ SLIDE SWITCH GRINDER W/CORD, 2 PACK

    The Makita 4-1/2″ Angle Grinder has a labyrinth construction that seals and protects the motor and bearings from dust and debris for a long life, with an additional, protective zigzag varnish that seals the motor from contaminants by forming a barrier under rotation. This UL-listed grinder provides high-output power with its 7.5 AMP motor that maintains a 11,000 RPM speed to produce excellent grinding with a 2-1/2 in. small-circumference, barrel-grip handle for added comfort. All ball-bearing design and metal gear housing provide durability.
    This is a special 2-Pack of this corded tool.

  • MAKITA 5″ / 6″ DUAL ACTION RANDOM ORBIT POLISHER, 18V LXT

    Makita polishers are preferred by automotive detailers and marine enthusiasts, and the 18V LXT® Brushless Cordless 5″ / 6″ Dual Action Random Orbit Polisher is packed with enhanced features for consistent performance, job after job. The dual action control offers “random orbit with forced rotation” or “random orbit with free rotation”, and the variable speed control dial has five speed settings so users are able to set the speed and action to the application. The cordless design eliminates the hassle of cord management and accidental marring of delicate surfaces.

  • MAKITA 1/4″, 3/8″ THREADED ROD CUTTER, 18V LXT

    Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.

  • MAKITA 4-1/2 – 5″ ANGLE GRINDER W/ BRAKE, 18V LXT

    Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder with Electric Brake. It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ technology automatically adjusts speed and torque during operation for optimal performance. The XAG16Z is ideal for grinding and cutting a wide range of materials including tile, concrete, pipe, conduit, and more.

    Additional features include an electric brake that stops the grinding or cut-off wheel in 2 seconds or less, and Electronic Torque Control that turns the motor off if rotation speed suddenly slows or the wheel is forced to a stop. The variable speed control dial allows manual RPM adjustment (3,000 – 8,500), allowing the user to match the speed to the application.

  • MAKITA 7″ CUT OFF / ANGLE GRINDER KIT, 18V X2 LXT

    Makita, a pioneer in brushless motor technology and battery innovation, combines both in the 18V X2 LXT® (36V) Lithium-Ion Brushless 7” Paddle Switch/Angle Grinder with Electric Brake. It’s powered by two 18V Lithium-Ion batteries for 36V power and performance, and has an electronically-controlled BL™ Brushless motor that matches torque and RPM to the application. Makita 18V X2 means freedom from the cord, even for demanding applications like grinding and cut-off applications that often call for a corded grinder. Best of all, users can remain in one battery platform, using the same fast-charging 18V batteries on the XAG12PT as they use across the Makita 18V LXT® cordless tool system.

  • MAKITA 4-1/2″ / 5″ ANGLE GRINDER W/ BRAKE, 18V LXT

    Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2” Cut-Off/Angle Grinder with Electric Brake. It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. 

    For added convenience, the XAG09Z has an electric brake that stops the wheel in 2 seconds or less upon release of the switch. The XAG10Z is ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more.

  • MAKITA 4-1/2″ ANGLE GRINDER TOOL, 18V LXT

    Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder (tool only, battery and charger sold separately). It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ Technology automatically adjusts speed and torque during operation for optimal performance. The XAG04Z is ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more.

  • MAKITA 4-1/2″ CORDLESS ANGLE GRINDER KIT, 18V LXT

    Makita delivers corded grinding performance without the cord with the 18V LXT® Lithium-Ion Brushless 4-1/2″ / 5” Cut-Off/Angle Grinder Kit. It’s powered by a Makita brushless motor for longer run time, increased power and speed, and longer tool life. For the most demanding applications, Makita’s exclusive Automatic Speed Change™ Technology automatically adjusts speed and torque during operation for optimal performance. The XAG04T is ideal for grinding, cutting and sanding a wide range of materials including tile, concrete, pipe, conduit, and more.

  • MAKITA 1/4″ DIE GRINDER

    Makita’s ¼-Inch Die Grinder (model GD0601) combines power and speed with motor-protection features for improved grinding performance. The GD0601 is engineered with a powerful AC/DC motor with 25,000 RPM in a slim body design, and a conveniently located slide-switch for on/off function. This combination of power and ease-of-use features makes the GD0601 ideal for a range of grinding tasks.

  • MAKITA 9″ TRIGGER HANDLE GRINDER

    Makita’s 9-Inch Angle Grinder (model GA9060), combines 15 AMP power with comfort and motor-protection features for longer-lasting industrial performance. The GA9060 weighs only 12.1 lbs. and is built with comfort and ergonomic features for extended use. The grinder features an ergonomic rubberized handle with trigger switch, and the gear housing can be positioned every 90 degrees for operator convenience. The side handle can be easily installed on either side of the tool.

    The GA9060 is a versatile and powerful grinder engineered for demanding applications including cutting, ferrous metal, paint and rust removal, shipyard maintenance, heavy machinery, metal polishing, general steel grinding, auto repair work, cutting brick and masonry, and restoration work. The grinder is built for welders, fabricators, plumbers, masons, electricians, automotive technicians, stone and tile workers, HVAC, and general contractors seeking a best-in-class industrial quality angle grinder.