The VHS-65 is our featured high-speed gas saw by DIDA. It has a 14″ blade capacity that has up to a 5″ cutting depth, and that can be used wet or dry. It is built with an anti-vibration system to reduce operator fatigue. Engine starts are easy with the compression release valve, and a catalytic converter ensures low emission levels during use.
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw.
Makita is the leader in brushless motor technology, and the 18V LXT® Lithium-Ion Brushless Cordless 5-7/8” Metal Cutting Saw delivers faster metal cutting through Unistrut®, all thread, channel, corrugated, conduit, pipe, sheet metal, square tubing, steel and more. With a full 2-1/4″ cutting capacity, it is ideal for electrical contractors since it will cut 2” conduit in one pass – a huge time saver. It is also ideal for HVAC, installation, metal building, metal fabrication, plumbing, metal roofing, and for any pro-contractor who requires a best-in-class cordless metal cutting saw. The kit includes two fast-charging 18V Lithium-Ion 5.0Ah batteries and a Rapid Optimum Charger.
Trades of all kinds are turning to oscillating multi-tools for a range of applications, and the Makita 18V LXT® Lithium-Ion Cordless Multi-Tool delivers corded speed and power without the cord. The XMT03Z is engineered with additional features like reduced vibration and lower noise for improved performance, and is ideal for cutting, sanding, scraping, grout removal, and more.
Makita has delivered a cordless cutting solution for steel rod cutting with the 18V LXT® Brushless Cordless Threaded Rod Cutter. It will make up to 1,300 cuts of 3/8” coarse thread threaded rod and 1,200 cuts of 3/8” coarse thread stainless steel threaded rod with a 5.0Ah battery (sold separately). The compact design makes the XCS03Z ideal for overhead cutting of installed threaded rod. Provides spark-free cuts that are clean and burr-free allowing easy hand-threading of fastener or nut.
Trades of all kinds are turning to oscillating multi-tools for a full range of applications, and the Makita Multi-Tool (TM3010CX1) combines power and performance with comfort and convenience features like reduced vibration and lower noise. The TM3010CX1 is ideal for cutting, sanding, scraping, tile replacement, grout removal, and more.
The TM3010CX1 is powered by a 3.0 AMP motor with soft start for smooth start-ups. The variable speed control dial (6,000 – 20,000 OPM) enables the user to match the speed to the application, and the electronic speed control maintains constant speed under load for smoother, higher-quality work. The TM3010CX1 has a 3.2 degree oscillation angle engineered for faster, more aggressive cutting and sanding.
The Makita 14” Cut-Off Saw (LW1401) is a metal-cutting solution built for light gauge metal stud and strut, pipe, all thread, conduit, tubing, rebar, and more. The 15 AMP motor delivers 3,800 RPM for the most demanding metal cutting applications. It is engineered to cut up to 5″ round stock, 4-11/16” square tube, and 4” x 7-5/8” or 2-3/4” x 9-1/8” rectangular tubing. It also features fence adjustment up to 45 degrees right or left, and a “tool-less” vice adjustment for increased productivity. The LW1401 weighs only 37 pounds with a locking pin that secures the cutting head in the down position for easy transport and storage. Additional features include a large ergonomic handle and two-stage lock-off power button.
The Makita 12” Dual-Bevel Sliding Compound Miter Saw with Laser (model LS1219L) combines capacity, accuracy and efficient dust extraction in a more compact size, with a unique 2-Steel Rail Sliding System that offers a reduced footprint for operation flush against a wall. The innovative direct-drive gearbox and guard system is engineered for increased vertical cutting capacity of baseboard (6-3/4”) and crown molding (8” nested). It will also make 15” crosscuts at 90 degrees. The saw miters 0° to 60° left and right, with positive stops at 0°, 15°, 22.5°, 31.6°, 45° and 60° (left or right). The bevel lock is located in the front of the saw for easy access and quick adjustments from 0° to 48° (left and right).
The Makita 11-Amp Reciprocating Saw (model JR3050T) combines a powerful 11 AMP motor with less weight (7.3 lbs.) for all day use and improved performance. The 11 AMP motor with variable speed (0-2,800 SPM) has a 1-1/8 inch blade stroke for efficient cutting. It is ideal for metal cutting, wood cutting, drywall and plaster, plastics, remodeling, and demolition applications.
Makita is giving landscapers more options with both MM4® 4-Stroke Engine and 18V X2 LXT® (36V) cordless couple-shaft power heads, and the Pole Saw Couple Shaft Attachment is the right accessory for nslucent bar oil tank with adjustable automatic chain lubrication, with a steel drive shaft engineered for lower vibration and longer service life. It quickly attaches to the Makita power head for easy operation.
The 14” MM4® 4-Stroke Power Cutter (model EK7651H) is the world's first 4-stroke power cutter. The EK7651H is another innovation in Makita’s expanding line-up of concrete solutions.
The 4-stroke EK7651H delivers several advantages over 2-stroke. No oil mixing is required, so contractors get simplified operation and no more engine failure due to improper mix. The MM4® 4-stroke engine eliminates the need for separate mixed oil/fuel can.
The Makita 14″ Power Cutter (model EK7301) is a gas power cutter engineered to meet the demand for convenience and performance. The EK7301 delivers with faster starting, more power, and improved fuel economy. The EK7301 has a 4.5 cu.in. (73 cc) engine with 5.1 HP (maximum horsepower) and a no load speed of 9,350 RPM to take on the most demanding applications. The ignition coil with start-support function stores electrical power with each pull for easier start-ups. It’s engineered for reduced flooding with a carburetor that includes improved deco-valve and metering spring for precise fuel regulation at start up.