Drill Bits

  • Sale

    Euroboor IBC – Pilot Pins

    Genuine Euroboor pilot pins imported directly from the manufacturer in The Netherlands. These pilot pins are manufactured for use with short short or long Euroboor hole cutters from 1/2″ to 1″ in diameter.

    Available in 77mm (HCS Annular cutter ø 12 – 60 mm) and 102mm (HMS Annular cutter ø 18 – 50 mm)

  • Sale

    EuroBoor HCS – Weldon HSS

    These Euroboor HSS Annular Cutters are heavy industrial grade 1 inch cutters that have a tempered black oxide finish with improved properties and superior performance.

    Available in: 7/16×1″, 1/2×1″, 9/16×1″, 5/6×1″, 11/16×2″, 3/4×1″, 13/16×1″, 7/8×1″, 15/16×2″, 1×1″

  • Sale

    EuroBoor HCL – Weldon HSS

    These Euroboor HSS Annular Cutters are heavy industrial grade 2 inch cutters that have a tempered black oxide finish with improved properties and superior performance.

    Available in: 1/2×2″, 9/16×2″, 5/6×2″, 11/16×2″, 3/4×2″, 13/16×2″, 7/8×2″, 15/16×2″, 1×2″

  • Sale

    HSS 8 PC Imperial – Annular Cutter Set

    This set of 6 premium quality industrial grade cutters have superior performance and no compromises. In addition this kit contains 2 pilot pins.
    Available in: 1x ø 9/16″ x 30 mm, 9/16″ x 55 mm, 11/16″ x 30 mm, 11/16″ x 55 mm, 13/16″ x 30 mm, 13/16″ x 55 mm

  • Ship Auger Drill Bits

    Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling. 5/16″ – 1-1/2″ in 6″ and 18″ length.

  • Aircraft Drill Bits

    Aircraft drill bits are long drill bits originally designed for use in the aircraft industry where they often need to drill holes reaching through deep cavities, and then through thin materials. You will find them invaluable for drilling holes in tight spaces, and drilling holes through long or wide pieces of wood.

  • Spade Drill Bits

    Spade bits are used for rough boring in wood. Spade bits are flat, with a centering point and two cutters. The cutters are often equipped with spurs in an attempt to ensure a cleaner hole. Intended for high speed use, they are used with electric hand drills. Spade bits are also sometimes referred to as “paddle bits”. Available in  1/4″ – 1-1/2″.

  • “Silver & Deming” Drill Bits

    One particular type of reduced-shank drill bits are Silver & Deming (S&D) bits, whose sets run from 33/64″ to 1″ drill body diameter with a standard 1/2″ reduced shank for all. This allows drill presses with 1/2″ chucks to run the larger drills. S&D bits are 6″ in length with a 3″ drilling depth.

  • Hot

    ThunderTwist SDS Drill Bits

    SDS-Plus-PicThe ThunderTwist’s TriCarb grade tip guarantees longer life with faster penetration due to increased chiseling action. ThunderTwist’s flute design, combined with copper brazing alloy creates the most reliable drill bit on the market. It is made with high quality American chrome-molybdenum nickel steel that is vacuum heat treated, and shot-peened for superior strength under the roughest conditions.

  • Duo-Bit Standard Masonry Drill Bits

    The Duo-Bit Masonry Bits feature a high speed steel shank and carbide tips for durability. From drilling concrete to powering through brickwork, these masonry drill bits are excellent for a variety of heavy duty applications! 1/8″ – 1″ in 3″ and 6″ length

  • Heavy Duty Cobalt Drill Bits

    Our Cobalt High Speed drill bits are made of high speed Cobalt Steel. The Cobalt content adds high abrasion resistance to the already hard working properties if our bits. Heavy web construction and 135 degree Split-Point add to the long life of these bits. Available in sizes 1/32″ – 1/2″.

  • HSS Black Oxide Drill Bits

    The HSS Black Oxide bits are made in the USA with a 118 degree point and are available from 1/32″ to 11/16″.e”]